Dumb question

This is what we do.
Post Reply
ChuckD
A Poster
A Poster
Posts: 152
Joined: Mon Feb 01, 2016 7:25 pm

Dumb question

Post by ChuckD »

My CZ 455 has a short length of pull for me. Was going to add a button plate from a flip flop, but can't get the stock plastic one off! I resorted to prying with a knife, but I gouged the wood. Any thoughts? I'm almost ready to put a grinder to it. Like its glues on.
Thanks
Chuck
CWS
A Poster
A Poster
Posts: 127
Joined: Tue Jun 06, 2006 9:36 pm
Location: Corpus Christi, TX

Re: Dumb question

Post by CWS »

A heat gun might work. If you don't have one, borrow your wife's hair dryer. Don't tell her.
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: Dumb question

Post by DavidABQ »

The CZ butt plates typically come off with a hear gun.
ChuckD
A Poster
A Poster
Posts: 152
Joined: Mon Feb 01, 2016 7:25 pm

Re: Dumb question

Post by ChuckD »

Thanks guys, hair dryer did the trick! extra 3/4" pull makes a nice difference.
thauglor
AAA Poster
AAA Poster
Posts: 628
Joined: Thu Aug 08, 2013 9:18 pm

Re: Dumb question

Post by thauglor »

There are two screws also holding on the butte late, make sure those are out too. I shortened the pull for my fiance's rifle, I had to saw through those lol.
Post Reply