Extended magazine release for 1712

This is what we do.
User avatar
dmakley
B Poster
B Poster
Posts: 30
Joined: Wed Sep 07, 2011 7:12 am
Location: Jacksonville FL

Extended magazine release for 1712

Post by dmakley »

Hey All, quick question for you Anschutz experts out there. I have a 1712 barreled action in a Wayne Merrier stock and would like to get a longer magazine release on it. I've done a little searching on the web and haven't found anything yet. I have heard that the releases on the biathlon rifles may work.

Does anyone know of anyone who makes an extended releases that will fit this rifle?
Dan
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Extended magazine release for 1712

Post by Bob259 »

dmakley wrote:Hey All, quick question for you Anschutz experts out there. I have a 1712 barreled action in a Wayne Merrier stock and would like to get a longer magazine release on it. I've done a little searching on the web and haven't found anything yet. I have heard that the releases on the biathlon rifles may work.

Does anyone know of anyone who makes an extended releases that will fit this rifle?
Your on the right track, the biathlon one will work. Try Neal Stepp a I.s.s. Shooters supply in Fort Worth.
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
User avatar
Evelio Mc Donald
Sponsor
Sponsor
Posts: 779
Joined: Thu Feb 23, 2006 9:05 pm
Location: Wimberley, Texas

Re: Extended magazine release for 1712

Post by Evelio Mc Donald »

I always bought them from Neal, for about $10.00 each, Two months ago I bought the last two he had $45.00 each. According to him Anschutz no longer makes them since they quit making the 54.18.
I would try Steve Boelster, he is the new Anschutz rep. in the USA.
Evelio.
Evelio
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: Extended magazine release for 1712

Post by Jerry G »

Here is a picture of mine. It is just a little screw that was put into the old release.
You do not have the required permissions to view the files attached to this post.
User avatar
OldRanger
AAA Poster
AAA Poster
Posts: 992
Joined: Thu Jun 06, 2013 9:00 am
Location: Missoula, MT
Contact:

Re: Extended magazine release for 1712

Post by OldRanger »

The biathlon release is very very long. I have one and when I put it in it stuck out a full inch. I am going to cut it down so it just sticks out. Might be easier to just make one if you have the tools or know someone who does.
I buy all my guns from t-rex. He's a small arms dealer.
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: Extended magazine release for 1712

Post by Jerry G »

Tools required:

electric drill
Small tap

Material required:

small screw to put into tapped hole
small dab of 'lock-tite' on screw thread

This isn't a brain operation.
User avatar
OldRanger
AAA Poster
AAA Poster
Posts: 992
Joined: Thu Jun 06, 2013 9:00 am
Location: Missoula, MT
Contact:

Re: Extended magazine release for 1712

Post by OldRanger »

Yeah, but to have a great looking carbon fiber rifle with a screw sticking out of it instead of a proper release?
I have one too, I just don't like it. Hopefully by the next time I see you I'll have a real release.

Now if only I could teach that release to shoot......
I buy all my guns from t-rex. He's a small arms dealer.
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: Extended magazine release for 1712

Post by DavidABQ »

I am with you OldRanger, for a rifle as elegant as an Anschutz a screw sticking out of the magazine release is pretty ghetto looking.

I am sure it is functional but there has to be a better way to create an extended magazine release.
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Extended magazine release for 1712

Post by Bob259 »

DavidABQ wrote:I am with you OldRanger, for a rifle as elegant as an Anschutz a screw sticking out of the magazine release is pretty ghetto looking.

I am sure it is functional but there has to be a better way to create an extended magazine release.
In Jerry's defense he did use a Shiney stainless one. ;)

If you can't find one let me know I think I have one from one of my builds.
Last edited by Bob259 on Tue Oct 07, 2014 6:56 am, edited 1 time in total.
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
User avatar
dmakley
B Poster
B Poster
Posts: 30
Joined: Wed Sep 07, 2011 7:12 am
Location: Jacksonville FL

Re: Extended magazine release for 1712

Post by dmakley »

Thanks for the responses! I was hoping someone made one that was easy to get.

Jerry, thanks for posting the picture. I may just do that to mine, yes the screw is a little ghetto, but as far as screws go that looks like a classy one, allen head even! got to do something, my finger was actually pretty sore after the last match from reaching up in to the magazine well, my fingers were slippery from that waxy SK ammo, that didn't help any.
Dan
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: Extended magazine release for 1712

Post by Jerry G »

The cap screw is recessed about 1/16 inch from the bottom of the stock. It is a real nice looking cap screw. :-bd
User avatar
dmakley
B Poster
B Poster
Posts: 30
Joined: Wed Sep 07, 2011 7:12 am
Location: Jacksonville FL

Re: Extended magazine release for 1712

Post by dmakley »

Image

Here is my new extended magazine release. I went to the hardware store and got a bit and tap and after checking out all of the different screw choices I went with one that has a knurled head on it. Works Great!
Dan
User avatar
OldRanger
AAA Poster
AAA Poster
Posts: 992
Joined: Thu Jun 06, 2013 9:00 am
Location: Missoula, MT
Contact:

Re: Extended magazine release for 1712

Post by OldRanger »

So basically you are saying you're screwed now?
I buy all my guns from t-rex. He's a small arms dealer.
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: Extended magazine release for 1712

Post by DavidABQ »

OldRanger wrote:So basically you are saying you're screwed now?
I am not sure about the owner but the rifle is certainly screwed.
=))
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: Extended magazine release for 1712

Post by Jerry G »

Looks great to me. :-bd
Post Reply