quickload for 6.5TCU

More expensive to feed, but worth it.
Varn
A Poster
A Poster
Posts: 197
Joined: Sat Aug 12, 2006 9:46 pm

Re: quickload for 6.5TCU

Post by Varn »

Thank you for the info from Quickload. I appreciate your time.
ywltzucanrknrl
A Poster
A Poster
Posts: 203
Joined: Thu Aug 06, 2009 3:41 pm

Re: quickload for 6.5TCU

Post by ywltzucanrknrl »

Varn, what charge are you shooting with the CFE and the 143 grain bullet?
Varn
A Poster
A Poster
Posts: 197
Joined: Sat Aug 12, 2006 9:46 pm

Re: quickload for 6.5TCU

Post by Varn »

Way above the 25 grains that quickload suggested. I have no sticky bolt lift or case head expansion or blanked primers. But my gun is throated for them so that changes the situation. The base of the bullet is just below shoulder neck junction on my loaded rounds.
mikee
Unclassified Poster
Posts: 9
Joined: Wed Apr 08, 2015 12:50 am

Re: quickload for 6.5TCU

Post by mikee »

I run a 6.5tcu and load 27.6gns ADI BM2powder behind 123gn Amax
In 24 inch barrel velocity average is 2600Fps.
It is a hot load so approach with caution,
Shoots .25-.5MOA in my rifle
Post Reply