Tikka two stage trigger
-
- AAA Poster
- Posts: 630
- Joined: Thu Aug 08, 2013 9:18 pm
Tikka two stage trigger
Just got back from Sportsmans warehouse after driving 20 miles to dry fire the new T3c tac a1.
The Tikka two stage trigger is nice, I doubt it would be as nice as my Tikka with a Barnard, but if it's anywhere less than $200 it will be worth buying.
Also dry fired the Howa 1500 and Weayherby, both with two stage triggers. Even though I think they are the same triggers, the Weatherby was a tiny bit more crisp than the is Howa, but the Tikka two stage was better than both.
I doubt the Tikka trigger will be for sale separately soon, but hopefully later in the year they will be. I'll give Beretta a call tomorrow and try and see of they will be available.
The Tikka two stage trigger is nice, I doubt it would be as nice as my Tikka with a Barnard, but if it's anywhere less than $200 it will be worth buying.
Also dry fired the Howa 1500 and Weayherby, both with two stage triggers. Even though I think they are the same triggers, the Weatherby was a tiny bit more crisp than the is Howa, but the Tikka two stage was better than both.
I doubt the Tikka trigger will be for sale separately soon, but hopefully later in the year they will be. I'll give Beretta a call tomorrow and try and see of they will be available.
- OldRanger
- AAA Poster
- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: Tikka two stage trigger
I want a 2 stage for my tikka! Can you still buy the barnards?
I buy all my guns from t-rex. He's a small arms dealer.
-
- AAA Poster
- Posts: 630
- Joined: Thu Aug 08, 2013 9:18 pm
Re: Tikka two stage trigger
Not sure, I got it from MT guns but he retired. I think best bet would be to contact Barnard and see if anyone imports them. The Barnard tikka doesn't have a safety fyi.OldRanger wrote:I want a 2 stage for my tikka! Can you still buy the barnards?
I have also found these Tikka two stage triggers, didn't order from them yet though https://www.cg-triggers.com/trigger-sto ... ka-trigger
Have also read over on scout.com that extreme accuracy might be making a two stage soon and that KRG, who make the chassis for Tikkas, might also come out with a two stage.
- OldRanger
- AAA Poster
- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: Tikka two stage trigger
Thanks for the info. I'll look around. Might just have to build a different gun. Oh darn ;)
I buy all my guns from t-rex. He's a small arms dealer.
- Emietenkorte
- A Poster
- Posts: 228
- Joined: Fri Apr 11, 2014 7:41 pm
- Location: Ephrata, WA
Re: Tikka two stage trigger
I have been talking with extreme accuracy about a Sako/Tikka two stage trigger since March of 2016. They told me it would be out by July of 2016... still waiting...
- Emietenkorte
- A Poster
- Posts: 228
- Joined: Fri Apr 11, 2014 7:41 pm
- Location: Ephrata, WA
Re: Tikka two stage trigger
I hope I don't have to wait as long as I have been for my grand-slam pins.... going on 2 years...
- OldRanger
- AAA Poster
- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: Tikka two stage trigger
What stocks do you tikka owners use? I ordered the Barnard but it will require widening the bottom metal and stock a bit. So I figured that might be a good time to restock it....
I buy all my guns from t-rex. He's a small arms dealer.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Tikka two stage trigger
Why not head over to the dark side and build a full on custom with a Defiance action?
You could always use a carbon fiber stock from Mr. Wooster!
You could always use a carbon fiber stock from Mr. Wooster!
- OldRanger
- AAA Poster
- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: Tikka two stage trigger
Time and money Dave, time and money. Ordering a Defiance puts you out a year and about $2500. Minimum. For a few hundred bucks I might get a serviceable rifle out of this tikka. I might get a custom stock on it later, gonna start with this trigger.
On a slightly different note I tried a Bix'n Andy 2 stage this weekend and holy cow was it sweet. I would say it was better than the Anschutz trigger on my smallbore (but it was set lighter, so maybe it was just that). If this barnard doesn't work out I may try a Bix'n Andy.
On a slightly different note I tried a Bix'n Andy 2 stage this weekend and holy cow was it sweet. I would say it was better than the Anschutz trigger on my smallbore (but it was set lighter, so maybe it was just that). If this barnard doesn't work out I may try a Bix'n Andy.
I buy all my guns from t-rex. He's a small arms dealer.
-
- AAA Poster
- Posts: 684
- Joined: Tue Jun 11, 2013 3:07 pm
- Location: West Monroe, LA
Re: Tikka two stage trigger
I wanted a Bix N Andy on my 2500X, but the pull weight wouldn't go high enough.OldRanger wrote: ↑Wed Jun 07, 2017 7:11 am Time and money Dave, time and money. Ordering a Defiance puts you out a year and about $2500. Minimum. For a few hundred bucks I might get a serviceable rifle out of this tikka. I might get a custom stock on it later, gonna start with this trigger.
On a slightly different note I tried a Bix'n Andy 2 stage this weekend and holy cow was it sweet. I would say it was better than the Anschutz trigger on my smallbore (but it was set lighter, so maybe it was just that). If this barnard doesn't work out I may try a Bix'n Andy.
I am NOT Danny Hatch.
- OldRanger
- AAA Poster
- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: Tikka two stage trigger
Yeah, guess you would have to use it on a silhouette class rifle not a hunter class. Might be the same with this barnard, although they offer different springs.
I buy all my guns from t-rex. He's a small arms dealer.
-
- AAA Poster
- Posts: 630
- Joined: Thu Aug 08, 2013 9:18 pm
Re: Tikka two stage trigger
I just mill the front of the trigger shoe hole longer in the factory trigger guard. You might have to thin out the bottom inside front of the trigger guard too, depending on location of barnard trigger shoe.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
- OldRanger
- AAA Poster
- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: Tikka two stage trigger
Thauglor, yeah, I have a buddy I think can do what needs done. He has a mill so hopefully we can make it look nice too. If I did it by hand it would look.....less than stellar.
Dave, Well if I had won the 50% off of a defiance action that they gave away at the iron man (2 actually) then I would be all in on that. As it is, I'll modify this Tikka.
Dave, Well if I had won the 50% off of a defiance action that they gave away at the iron man (2 actually) then I would be all in on that. As it is, I'll modify this Tikka.
I buy all my guns from t-rex. He's a small arms dealer.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Tikka two stage trigger
You want to modify a firearm then you need a Remington model 700! They are like the Chevy 350 engine of the hunting rifle world!
You can modify that rifle far easier than a Tikka with all of the parts available for a Remington 700.