New Source for Silhouette Stocks

Want to buy or want to sell.
Post Reply
User avatar
Evelio Mc Donald
Sponsor
Sponsor
Posts: 779
Joined: Thu Feb 23, 2006 9:05 pm
Location: Wimberley, Texas

New Source for Silhouette Stocks

Post by Evelio Mc Donald »

I just acquired a new source for Silhouette stocks, they are an exact copy of the discontinued RTS Robertson/Pharr Composite stocks however these are made of wood either laminated of solid wood. The laminated stocks are heavier than solid wood stocks but they will make weight for hunter class if used on Anschutz 1712 barrel action or the new 5418 actions with the 1712 barrels. As far as standard class they will make weight with no problem on any action/barrel combination. The solid wood will be either Maple or Pine. All stocks are flat tops and completely finished on outside with 10 coats of clear automotive top coat. Solid wood stocks can be stained any color prior to clear coat and Laminated stocks are available in multiple laminated colors prior to clear coat. These stocks will work for both small or big bore rifles.

The cost of the flat tops is $400 for either solid or Laminated. If you want me to inlet and Pillar/bed (any action) the total will be $650.

Once I figure out how to post pictures I'll get them loaded.

Evelio McDonald
713-302-7906
eveliomcdonald@gmail.com
You do not have the required permissions to view the files attached to this post.
Evelio
User avatar
acorneau
AAA Poster
AAA Poster
Posts: 880
Joined: Sun Feb 22, 2015 12:12 pm
Location: Houston

Re: New Source for Silhouette Stocks

Post by acorneau »

Exciting news Evelio! Options are almost always good.

:-bd
Allen Corneau
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: New Source for Silhouette Stocks

Post by Bob259 »

Nice!!!
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: New Source for Silhouette Stocks

Post by DavidABQ »

I bet that would look really nice in maple! \m/
Doodaddy
AAA Poster
AAA Poster
Posts: 684
Joined: Tue Jun 11, 2013 3:07 pm
Location: West Monroe, LA

Re: New Source for Silhouette Stocks

Post by Doodaddy »

Looks good! Thanks for keeping Joe in line! B-)

What is the estimated weight for a flat top solid wood stock?
I am NOT Danny Hatch. Image
Longbow
B Poster
B Poster
Posts: 50
Joined: Sun Feb 28, 2010 11:01 am
Location: Montana

Re: New Source for Silhouette Stocks

Post by Longbow »

You can get more weight knocked off by drilling out the buttstock........
User avatar
Evelio Mc Donald
Sponsor
Sponsor
Posts: 779
Joined: Thu Feb 23, 2006 9:05 pm
Location: Wimberley, Texas

Re: New Source for Silhouette Stocks

Post by Evelio Mc Donald »

Doodaddy and Longbow
The weight of a laminated flat top is 3 lbs. as Longbow mention, by drilling out 6" deep all around the inside of the buttstock and milling out the barrel channel, after completing the inletting, and installing the aluminum pillars the stock weigh 2 lbs. and with a no.4 taper, 25" long barrel, and a Predator single shot action bedded, the gun in the picture weighted 7 lbs. 11 ounces which left 1 lbs. 5 ounces for scope and rings, enough to qualify for High Power Hunter Class.
The regular wood flat top stocks weigh 2 lbs. so no problem making weight with them.
Evelio.
Evelio
Doodaddy
AAA Poster
AAA Poster
Posts: 684
Joined: Tue Jun 11, 2013 3:07 pm
Location: West Monroe, LA

Re: New Source for Silhouette Stocks

Post by Doodaddy »

Evelio Mc Donald wrote: Sun Jun 18, 2017 11:44 amThe regular wood flat top stocks weigh 2 lbs. so no problem making weight with them.
Evelio.
Good. I was hoping he was able to hit the two pound mark.
I am NOT Danny Hatch. Image
Post Reply