Parallex out of adjustment

All the dope on risers, rings, scopes and optics.
Post Reply
Ken Green
AA Poster
AA Poster
Posts: 323
Joined: Sat Sep 03, 2016 5:49 pm
Location: Springfield, Louisiana

Parallex out of adjustment

Post by Ken Green »

I have a leupold FX3 25X scope that I just bought from Mr. Pete. I unsealed the box when I got it in. Friday afternoon, at the Louisiana state high power match in Zwolle, I found that the scope would only be in clear focus around the distance for air rifle silhouettes. In order to try and use it, I had to turn the AO as far as it would go, past the infinity mark. Plus I had to turn the eye piece all the way in. This put the reticle very much out of focus and the animals were not clear at all. They were blurry but I was able to make them out enough to shoot.

My question is: do I send the scoep back to Pete or do I send it to Leupold?
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: Parallex out of adjustment

Post by Jerry G »

Leupold
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: Parallex out of adjustment

Post by DavidABQ »

Jerry G wrote:Leupold
Send it to Leupold for them to fix it.
Ken Green
AA Poster
AA Poster
Posts: 323
Joined: Sat Sep 03, 2016 5:49 pm
Location: Springfield, Louisiana

Re: Parallex out of adjustment

Post by Ken Green »

I shipped it to Leupold on Friday.
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: Parallex out of adjustment

Post by Jerry G »

Don't ever send a 'bumped' scope back to the big L. They will put it back to factory spec, and there goes your bump.
fabcraft
Unclassified Poster
Posts: 7
Joined: Fri Jan 06, 2017 7:14 am

Re: Parallex out of adjustment

Post by fabcraft »

We had the same problem.
I have three of them going back for repairs.
All of them where some of the last of that model built and very close together on serial numbers. FX3 25x
Have them check your elivation dial. All three of ours would be exactly on 0 but as you turn the dial the clicks start to misalign with the 1/4 click marks at about 2.75 and then realign at about 9.75. Windage worked just fine.
I have found Leupold has always stood behind their scopes no matter what the problem, so I'm not to worried. Just a little bump in the road.
A year from now I will have forgotten it ever happened.
Mike
Post Reply