Suggestions on Mounting Scope to Older Anschutz
-
- Unclassified Poster
- Posts: 8
- Joined: Wed Jun 16, 2010 2:07 pm
Suggestions on Mounting Scope to Older Anschutz
I have a Anschutz Model 54 built in 1962. I would like to mount a scope on it without having to drill holes to accomodate the forward position scope rings. This model 54 has the standard grooves/slots on the action where the rear peep sight mounts. However there aren't the same grooves/slots on the forward part of the action. There are the standard scope blocks available beyond the action designed for the older model long scopes. I really don't want to have holes drilled in the action to address this situation. Is there anything on the market that mounts to the grooves/slots already on the rear portion of the action that extends over the action to accommodate the forward scope ring? Any help would be appreciated.
Thanks!
Thanks!
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
-
- Unclassified Poster
- Posts: 8
- Joined: Wed Jun 16, 2010 2:07 pm
Re: Suggestions on Mounting Scope to Older Anschutz
Jason,
Thank you for your input! This is exactly the item I was seeking to solve my problem.
Mike
Thank you for your input! This is exactly the item I was seeking to solve my problem.
Mike
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Suggestions on Mounting Scope to Older Anschutz
Sorry for the short answer with no info. I was about to head out to a meeting at work. If you need it, they also make a drop compensation version of that mount. Just look around on the BKL website.
- kitsap
- B Poster
- Posts: 16
- Joined: Sat Nov 08, 2008 5:07 pm
- Location: Western Washington
Re: Suggestions on Mounting Scope to Older Anschutz
Check out the pictures in this thread ....
http://rimfirecentral.com/forums/showth ... p?t=346130
It is an older Anschutz with the grooves only on the rear portion of the action.
DougF
http://rimfirecentral.com/forums/showth ... p?t=346130
It is an older Anschutz with the grooves only on the rear portion of the action.
DougF
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Suggestions on Mounting Scope to Older Anschutz
Here's a link to the BKL 274 rings used on the rifle in the above link.
http://www.bkltech.com/BKL_1x0_6_Offset ... kl-274.htm
http://www.bkltech.com/BKL_1x0_6_Offset ... kl-274.htm