Weaver 1/8 to 1/4?

All the dope on risers, rings, scopes and optics.
Post Reply
bugabob
B Poster
B Poster
Posts: 56
Joined: Mon May 21, 2007 5:58 am
Location: OKC

Weaver 1/8 to 1/4?

Post by bugabob »

Can a Weaver be changed from 1/8 to 1/4 min clicks?
User avatar
Jim Beckley
Master Poster
Master Poster
Posts: 1158
Joined: Tue Jan 23, 2007 7:54 pm
Location: Cave Creek, Arizona

Re: Weaver 1/8 to 1/4?

Post by Jim Beckley »

As far as I know, you are stuck with a 1/8th, I haven't heard or seen anyone change from 1/8th to 1/4th. I have three T-24's, two are 1/4 and one is 1/8. I wish they were all 1/4th. Years ago someone made an after market cap cover that went from like 0-15 or whatever it was instead of the 1-9 and then back to 0 as it is on a factory cap, but I haven't seen one for a long time.
U.S. Army-Donating blood since 1775.
Joaquin B
AA Poster
AA Poster
Posts: 270
Joined: Sat Aug 12, 2006 11:26 am
Location: Oro Valley, Arizona

Re: Weaver 1/8 to 1/4?

Post by Joaquin B »

Like Jim, I also have a couple of 1/4 T-24s and one 1/8.

I use the 1/8 T-24 on my small bore rifle, since with the ammo I use, I never have to go past a full turn of the elevation turret. I consider it a minor niusance.

I called Weaver a few years ago to ask if they could retrofit the scope with 1/4" click turrets and they said NO.
Joaquin B
Post Reply