Henry trigger pull weight
-
- B Poster
- Posts: 91
- Joined: Fri Nov 27, 2015 12:55 pm
Henry trigger pull weight
How light can a trigger pull weight be obtained on a Henry 22lr and still have consistency and safety?
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Re: Henry trigger pull weight
+/- 2pounds. Maybe a bit less but I would hesitate to use it for anything other than target shooting and or let a kid/inexperienced shooter use it.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- B Poster
- Posts: 91
- Joined: Fri Nov 27, 2015 12:55 pm
Re: Henry trigger pull weight
Is it a matter of spring change and polishing or does it require gunsmith experience ?
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Re: Henry trigger pull weight
Spring change to get the lightest you can find that will get the trigger to ride the hammer reliably then depending on tolerance stack you may get away with polish or you may have to cut back the sear on the hammer to take creep out.
If you are not confident in your abilities pay a smith to do it.
If you are not confident in your abilities pay a smith to do it.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
- Tlee
- AAA Poster
- Posts: 679
- Joined: Wed Feb 21, 2007 9:55 am
- Location: Where Bob Wills is still the King
- Contact:
Re: Henry trigger pull weight
My wife's Frontier breaks just under 1lb and is not prone to A.D. at all. I've had one down to 11oz but didn't trust it, even though it never AD'd.
One thing I've noticed is it isn't unusual for them to have just a bit of creep when they're below 2lbs or so.
- Tim
- Another Dang 9
- Master Poster
- Posts: 1333
- Joined: Thu Dec 10, 2009 7:24 pm
- Location: The Peoples Republic of Massachusetts
Re: Henry trigger pull weight
I have one and the factory trigger weight is fine as is. I did polish the trigger face to remove the groves and it feels better. Been shooting it since 2002 with no other modifications other than a tang sight. Love it as is.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
NRA Endowment Member
-
- AAA Poster
- Posts: 684
- Joined: Tue Jun 11, 2013 3:07 pm
- Location: West Monroe, LA
Re: Henry trigger pull weight
My 24" Frontier came in around 2lbs from the factory. Plenty light enough for this game and since my Rossi and Marlin are both at the same weight, I decided to leave it there.
I am NOT Danny Hatch.