357 Mag - 200 meter subsonic load

Centerfires, rimfires, pistol cartridges and everything in between.
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

357 Mag - 200 meter subsonic load

Post by TheBugFather »

I settled on a 200gr Sierra or Hornaday RN bullet in a 357 mag or 38 spl brass with 7 gr of VV 3n38 at around 1050fps

Funny looking but people have a blast shooting it because it makes very little noise and recoil.

Next to all the 30-30's going off it sounds like a little fart :lol:

IMG_5684.jpg

The first is 180gr Hornaday xtp, second is 200gr Sierra RN (both in 357 mag brass), third is 180gr Speer FN and fourth is 200gr Sierra again, but both in 38spl brass.

Fun to shoot, but you have to have good follow through (which I don't) or else you will be off target before the bullet leaves the barrel =))

Have fun looking PAndy!

Dennis
You do not have the required permissions to view the files attached to this post.
The Bug Father
...I don't like recoil, but I love to experiment.
User avatar
PAndy
B Poster
B Poster
Posts: 97
Joined: Mon Jul 31, 2017 5:47 am

Re: 357 Mag - 200 meter subsonic load

Post by PAndy »

How many seconds do you have to wait for the bullet to hit the ram?
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

Re: 357 Mag - 200 meter subsonic load

Post by TheBugFather »

PAndy wrote: Sun Jan 24, 2021 8:13 pm How many seconds do you have to wait for the bullet to hit the ram?
probably 2 or 3 seconds, but feels more like 5 or 6 seconds. :))

You actually see the bullet slowly bounce off the target when it is done pushing it over!

Thanks for looking, Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
Doodaddy
AAA Poster
AAA Poster
Posts: 684
Joined: Tue Jun 11, 2013 3:07 pm
Location: West Monroe, LA

Re: 357 Mag - 200 meter subsonic load

Post by Doodaddy »

What's the barrel's twist rate? Is it stabilizing those 200gr bullets pretty well?
I am NOT Danny Hatch. Image
User avatar
Ojaileveraction
A Poster
A Poster
Posts: 113
Joined: Mon May 22, 2017 5:32 pm
Location: Ventura California

Re: 357 Mag - 200 meter subsonic load

Post by Ojaileveraction »

That looks like just a courtesy crimp (just for looks) on the 357case w the 200 grain and the 180g and the 39sp case.

Thanks for the update Dennis.
Tim
Guns, They're not really yours, until you void the warranty.
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

Re: 357 Mag - 200 meter subsonic load

Post by TheBugFather »

Doodaddy wrote: Mon Jan 25, 2021 8:40 am What's the barrel's twist rate? Is it stabilizing those 200gr bullets pretty well?
This is out of a Winchester 1892 (Japan), should be the standard, for them of, I think 1-18.5 or so.

Marlin's have a 1-16 twist , so they like the heavier bullets.

I think that is why they don't do so good with the light 110gr bullets like the Winchesters

This is from memory, so might not be exact numbers, but you get the idea.

Don't try this with a Rossi, they have a strange 1-30 twist.

They seem to be able to reliably shoot minute of Ram, and I tested a few on paper and they make round holes.

No extensive testing yet for accuracy.

Thanks, Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

Re: 357 Mag - 200 meter subsonic load

Post by TheBugFather »

Ojaileveraction wrote: Mon Jan 25, 2021 9:07 am That looks like just a courtesy crimp (just for looks) on the 357case w the 200 grain and the 180g and the 39sp case.

Thanks for the update Dennis.
Yes, lee factory crimp or taper crimp. Keeps if from hanging up on things.

Thanks, Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

Re: 357 Mag - 200 meter subsonic load

Post by TheBugFather »

I honestly think a heavy long barrel 44 mag or better a 44-40 would be the best for this job.

But I don't have one, so this is what I got.

Thanks, Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
Doodaddy
AAA Poster
AAA Poster
Posts: 684
Joined: Tue Jun 11, 2013 3:07 pm
Location: West Monroe, LA

Re: 357 Mag - 200 meter subsonic load

Post by Doodaddy »

dwostler wrote: Mon Jan 25, 2021 5:48 pm
Doodaddy wrote: Mon Jan 25, 2021 8:40 am What's the barrel's twist rate? Is it stabilizing those 200gr bullets pretty well?
This is out of a Winchester 1892 (Japan), should be the standard, for them of, I think 1-18.5 or so.

Marlin's have a 1-16 twist , so they like the heavier bullets.

I think that is why they don't do so good with the light 110gr bullets like the Winchesters

This is from memory, so might not be exact numbers, but you get the idea.

Don't try this with a Rossi, they have a strange 1-30 twist.

They seem to be able to reliably shoot minute of Ram, and I tested a few on paper and they make round holes.

No extensive testing yet for accuracy.

Thanks, Dennis
Yeah I wasn't planning on trying it with my Rossi. I knew it wouldn't go well. I asked mostly out of curiosity honestly.
I am NOT Danny Hatch. Image
cedestech
Distinguished Master Poster w/Palms
Distinguished Master Poster w/Palms
Posts: 2324
Joined: Sun May 08, 2011 3:06 pm

Re: 357 Mag - 200 meter subsonic load

Post by cedestech »

Doodaddy wrote: Tue Jan 26, 2021 7:51 am

Yeah I wasn't planning on trying it with my Rossi. I knew it wouldn't go well. I asked mostly out of curiosity honestly.
T's Rossi is actually shooting 158's pretty good BUT they need to be driven hard...

FWIW, 158 will give you a 80+% knock down rate.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
Doodaddy
AAA Poster
AAA Poster
Posts: 684
Joined: Tue Jun 11, 2013 3:07 pm
Location: West Monroe, LA

Re: 357 Mag - 200 meter subsonic load

Post by Doodaddy »

cedestech wrote: Tue Jan 26, 2021 8:42 am
Doodaddy wrote: Tue Jan 26, 2021 7:51 am

Yeah I wasn't planning on trying it with my Rossi. I knew it wouldn't go well. I asked mostly out of curiosity honestly.
T's Rossi is actually shooting 158's pretty good BUT they need to be driven hard...

FWIW, 158 will give you a 80+% knock down rate.
That's better than I would have thought. I've historically shot the 125gr Rainier FNs, but since they're discontinued I've bought and loaded up some Xtreme 125gr FNs. Haven't shot them yet.

I've always shot the 30-30 in the big game. I want to make sure I knock over every animal I happened to have hit. lol
I am NOT Danny Hatch. Image
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

Re: 357 Mag - 200 meter subsonic load

Post by TheBugFather »

Trying this load in another rifle today, Cimmaron takedown model, just discovered it has a fast 1-14 twist like Colts.

Hopefully I can try it out in Arizona in a few weeks.

Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
User avatar
Ojaileveraction
A Poster
A Poster
Posts: 113
Joined: Mon May 22, 2017 5:32 pm
Location: Ventura California

Re: 357 Mag - 200 meter subsonic load

Post by Ojaileveraction »

Dennis,
How did it go with the 200gr Hornadys and the Take Down?
I have some 200gr Cast coming, Not as happy with the Hornadys using the powders I have.
Mixing Jacketed and Cast data has been interesting.
Tim
Guns, They're not really yours, until you void the warranty.
User avatar
ppkny
AAA Poster
AAA Poster
Posts: 992
Joined: Sat Aug 05, 2006 7:07 am
Location: Endicott, NY

Re: 357 Mag - 200 meter subsonic load

Post by ppkny »

I switched from 158gr FP Rainer's to 158gr FP Berry's last year when Rainer went out of business. I don't notice any significant difference in the bullet performance. Using 7.5gr of Unique light recoil and never fails to take down a ram.
ppkny
User avatar
TheBugFather
AAA Poster
AAA Poster
Posts: 839
Joined: Thu Jul 08, 2010 3:14 am
Location: So. California

Re: 357 Mag - 200 meter subsonic load

Post by TheBugFather »

Ojaileveraction wrote: Sun Feb 07, 2021 8:00 pm Dennis,
How did it go with the 200gr Hornadys and the Take Down?
I have some 200gr Cast coming, Not as happy with the Hornadys using the powders I have.
Mixing Jacketed and Cast data has been interesting.
Tim, I broke the ejector and had a little trouble with the all 357 mag last rounds getting hung up on the loading gate door.

other than that, worked well. I'm taking my normal Win 1892 to Arizona.

Thanks, Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
Post Reply