Henry Rifles, 24" 357....
-
- Distinguished Master Poster w/Palms
- Posts: 2330
- Joined: Sun May 08, 2011 3:06 pm
Henry Rifles, 24" 357....
I would be first in line to buy one, even if they used the 20" mag tube (like they do with their 24" small bore rifle).
Obviously side gate loading would be great but the 24" barrel is really what I'd love and would buy one in a heart beat. (Teresa shoots Henrys in all 3 guns).
I messaged them on their FB page and received this response.
"Hi Emmett, thanks very much for the suggestion. If you haven't already done so, please drop a note in our new suggestion box here: https://www.henryusa.com/henry-firearm-suggestion-box/
This is how we're keeping track of all the product suggestions we get. The more requests we get for a specific product, the more likely it is to become a reality!"
I know they made the 24" small bore rifle because enough people asked and the 327 (though I haven't actually seen anyone shooting them)...
https://www.henryusa.com/henry-firearm-suggestion-box/
Obviously side gate loading would be great but the 24" barrel is really what I'd love and would buy one in a heart beat. (Teresa shoots Henrys in all 3 guns).
I messaged them on their FB page and received this response.
"Hi Emmett, thanks very much for the suggestion. If you haven't already done so, please drop a note in our new suggestion box here: https://www.henryusa.com/henry-firearm-suggestion-box/
This is how we're keeping track of all the product suggestions we get. The more requests we get for a specific product, the more likely it is to become a reality!"
I know they made the 24" small bore rifle because enough people asked and the 327 (though I haven't actually seen anyone shooting them)...
https://www.henryusa.com/henry-firearm-suggestion-box/
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- AAA Poster
- Posts: 684
- Joined: Tue Jun 11, 2013 3:07 pm
- Location: West Monroe, LA
Re: Henry Rifles, 24" 357....
I called them when I spent some time with my Henry 24" 22lr specifically asking for 357 and 30-30 versions. I'd sell my Rossi and Winchester and shoot Henry across all three classes if they did that.
Suggestions sent in!
Suggestions sent in!
I am NOT Danny Hatch.
-
- B Poster
- Posts: 70
- Joined: Sat Apr 28, 2007 3:57 pm
Re: Henry Rifles, 24" 357....
Why a 357 magnum?
I've been posting a suggestion on Henry's website monthly for over a year. 357 Maximum, 24" octagon barrel, side loading gate. Don't care if blue or stainless.
Brass is no longer a problem. Starline has it.
Think of it, one rifle for PC and LR.
I'd be the first at their factory door if they offered this rifle.
I've been posting a suggestion on Henry's website monthly for over a year. 357 Maximum, 24" octagon barrel, side loading gate. Don't care if blue or stainless.
Brass is no longer a problem. Starline has it.
Think of it, one rifle for PC and LR.
I'd be the first at their factory door if they offered this rifle.
- Sporty
- AA Poster
- Posts: 329
- Joined: Sun Oct 12, 2014 4:05 pm
- Location: NC
Re: Henry Rifles, 24" 357....
My same suggestions were posted to their "suggestion box" a year ago for a .357 Magnum & .30-30. Hunters want the shorter barrels and Henry caters to hunters.
-Charlie Meli
Match director @ Piedmont Gun Club, Rutherdfordton, NC
Match director @ Piedmont Gun Club, Rutherdfordton, NC
-
- A Poster
- Posts: 146
- Joined: Mon Nov 09, 2015 7:48 pm
- Location: Fort Worth
Re: Henry Rifles, 24" 357....
We have a 24" Henry 22 and it's a great shooter. I'd buy a 24" Henry 357. Especially if it had a pistol grip.
-
- Distinguished Master Poster w/Palms
- Posts: 2330
- Joined: Sun May 08, 2011 3:06 pm
Re: Henry Rifles, 24" 357....
https://www.chuckhawks.com/henry_big-bo ... -case.html
My wife has a "steel big boy" 20" round barrel "all weather"(hard chrome plated with a matte finish) in 357.
It shoots nice, with a little work it has easily the best trigger out of all of our lever guns (we have a herd, or glaring, or murder... what ever you call a bunch of lever guns...).
I have handled the case colored octagon barrel. Mechanically the same, cosmetically different and a little heavier.
With a 24" barrel I could definitely live with it. The weight and balance would be fine. My wifes shoots sub 3MOA with iron sights at 100. Plenty good enough for PC. Probably shoots more like +/- 2MOA if I was to put glass on it.
The top half of the action resembles a 336 with the bottom part resembling a revolver trigger. It is well built and the fit and finish is nice at the price point.
If they put a gate on it.... hubba hubba...
My wife has a "steel big boy" 20" round barrel "all weather"(hard chrome plated with a matte finish) in 357.
It shoots nice, with a little work it has easily the best trigger out of all of our lever guns (we have a herd, or glaring, or murder... what ever you call a bunch of lever guns...).
I have handled the case colored octagon barrel. Mechanically the same, cosmetically different and a little heavier.
With a 24" barrel I could definitely live with it. The weight and balance would be fine. My wifes shoots sub 3MOA with iron sights at 100. Plenty good enough for PC. Probably shoots more like +/- 2MOA if I was to put glass on it.
The top half of the action resembles a 336 with the bottom part resembling a revolver trigger. It is well built and the fit and finish is nice at the price point.
If they put a gate on it.... hubba hubba...
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- Distinguished Master Poster w/Palms
- Posts: 2330
- Joined: Sun May 08, 2011 3:06 pm
Re: Henry Rifles, 24" 357....
Go to the link in the first post and fill it out. As far as production goes I would hope it wouldn't be too hard for them to do everything the same but add 4" to the length of the barrel. I know gate loading may be asking for too much....
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
- Another Dang 9
- Master Poster
- Posts: 1333
- Joined: Thu Dec 10, 2009 7:24 pm
- Location: The Peoples Republic of Massachusetts
Re: Henry Rifles, 24" 357....
I'm throwing a wrench into this convo by saying a .38 special chamber would be better than a .357 mag. or .357 max. We all(.357 mag reloaders) try like hell to work up a light load to .38 special velocity. Why not make one chambered in it?
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
NRA Endowment Member
-
- Distinguished Master Poster w/Palms
- Posts: 2330
- Joined: Sun May 08, 2011 3:06 pm
Re: Henry Rifles, 24" 357....
Uberti 1866 comes chambered in 38special....Another Dang 9 wrote: ↑Thu Oct 31, 2019 4:04 pm I'm throwing a wrench into this convo by saying a .38 special chamber would be better than a .357 mag. or .357 max. We all(.357 mag reloaders) try like hell to work up a light load to .38 special velocity. Why not make one chambered in it?
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
- Another Dang 9
- Master Poster
- Posts: 1333
- Joined: Thu Dec 10, 2009 7:24 pm
- Location: The Peoples Republic of Massachusetts
Re: Henry Rifles, 24" 357....
Emmett I like the Uberti's but don't see a lot of them on the line. I'm guessing they have heavy triggers?!?
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
NRA Endowment Member
-
- AAA Poster
- Posts: 684
- Joined: Tue Jun 11, 2013 3:07 pm
- Location: West Monroe, LA
Re: Henry Rifles, 24" 357....
I think my dad's Uberti 357 trigger from the factory was around a 7.5lb break feeling like dragging over gravel road. They can be nice if you put the time in though.Another Dang 9 wrote: ↑Fri Nov 01, 2019 8:36 am Emmett I like the Uberti's but don't see a lot of them on the line. I'm guessing they have heavy triggers?!?
They're pretty enough to almost not care though!
I am NOT Danny Hatch.
- Another Dang 9
- Master Poster
- Posts: 1333
- Joined: Thu Dec 10, 2009 7:24 pm
- Location: The Peoples Republic of Massachusetts
Re: Henry Rifles, 24" 357....
The trigger seems to be the one thing I've heard people complain about the most. Same for the Browning 52s.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
NRA Endowment Member
-
- Distinguished Master Poster w/Palms
- Posts: 2330
- Joined: Sun May 08, 2011 3:06 pm
Re: Henry Rifles, 24" 357....
It has 2 or 3 safeties built into it and it's a 3 piece affair. Very little metal work is involved and no hammer spring work needed. There is a intermediate piece you need to get the spring pressure right on to get the weight down. A gunsmith should be able to get a safe sub-2# trigger out of it fairly easy.Another Dang 9 wrote: ↑Fri Nov 01, 2019 2:55 pm The trigger seems to be the one thing I've heard people complain about the most. Same for the Browning 52s.
Stock... yeah, leaves a bit to be desired...
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
- Another Dang 9
- Master Poster
- Posts: 1333
- Joined: Thu Dec 10, 2009 7:24 pm
- Location: The Peoples Republic of Massachusetts
Re: Henry Rifles, 24" 357....
My regular gunsmith here in the NE retired and I wouldn't trust anyone up here to do a competent trigger job on lever rifles these days without knowing they've done many before. Its all ARs and shotguns around here. Hell I can do those myself.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
NRA Endowment Member