anschutz superair 2002
-
- B Poster
- Posts: 37
- Joined: Sun Mar 01, 2015 7:24 pm
anschutz superair 2002
just acquired a 2002 superair. IT has a cracked stock in the grid area any idea on a replacement stock?Does anything innerchange any help would be wonderfull.
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: anschutz superair 2002
Replacement stocks are usually more than what you paid for the rifle.
Drill the grip.
Drive hardwood dowels in with glue.
Cut dowels after the glue dries.
Sand grip back flush.
Most people then use a spray can finish.
Any new stock you find will crack in the same grip area.
You will not have any more problems if the stock you have is properly repaired.
A internet search will reveal many tutorials on this type grip repair.
Drill the grip.
Drive hardwood dowels in with glue.
Cut dowels after the glue dries.
Sand grip back flush.
Most people then use a spray can finish.
Any new stock you find will crack in the same grip area.
You will not have any more problems if the stock you have is properly repaired.
A internet search will reveal many tutorials on this type grip repair.
- acorneau
- AAA Poster
- Posts: 890
- Joined: Sun Feb 22, 2015 12:12 pm
- Location: Houston
Re: anschutz superair 2002
Check in with Joe Hein at Elite Shooting Sports.
He services these air rifles and just might have a lead on a spare stock looking for a home. (He was my source for a replacement valve, good guy to work with.)
https://www.eliteshootingsport.com
He services these air rifles and just might have a lead on a spare stock looking for a home. (He was my source for a replacement valve, good guy to work with.)
https://www.eliteshootingsport.com
Allen Corneau