Sold: Anschutz 1712 barrel

Want to buy or want to sell.
Post Reply
thauglor
AAA Poster
AAA Poster
Posts: 628
Joined: Thu Aug 08, 2013 9:18 pm

Sold: Anschutz 1712 barrel

Post by thauglor »

Bought this from ANA to rebarrel one of my rifles but going with a custom barrel instead. Comes with the collar/recoil lug. I believe ANA took these off the 54:18 actions they imported when they built a few of those 54:18 benchrest rifles. Just factory test fired.

$200 shipped
Last edited by thauglor on Fri Jan 22, 2021 1:31 pm, edited 2 times in total.
User avatar
Merlin
AAA Poster
AAA Poster
Posts: 771
Joined: Wed Oct 22, 2008 6:56 pm
Location: Friendswood, TX

Re: WTS: Anschutz 1712 barrel

Post by Merlin »

Length please. Do you know what the shank diameter is?
Thanks
"Only God can judge me." Merlin

"Merlin..Your'e a rimfire whore." God

NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
thauglor
AAA Poster
AAA Poster
Posts: 628
Joined: Thu Aug 08, 2013 9:18 pm

Re: WTS: Anschutz 1712 barrel

Post by thauglor »

I will measure it in a bit, but the specs say its a 21.5 inch barrel with an 0.7 inch muzzle diameter. Its the standard 1712 barrel. The shank is the standard anschutz barrel tenon, i will measure it for you in a an hour or so.
thauglor
AAA Poster
AAA Poster
Posts: 628
Joined: Thu Aug 08, 2013 9:18 pm

Re: WTS: Anschutz 1712 barrel

Post by thauglor »

Barrel is 22 inches long. 0.789 inch diameter tenon.
User avatar
Merlin
AAA Poster
AAA Poster
Posts: 771
Joined: Wed Oct 22, 2008 6:56 pm
Location: Friendswood, TX

Re: WTS: Anschutz 1712 barrel

Post by Merlin »

Thanks! I am checking another rifle to see if I can fit this...
"Only God can judge me." Merlin

"Merlin..Your'e a rimfire whore." God

NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
thauglor
AAA Poster
AAA Poster
Posts: 628
Joined: Thu Aug 08, 2013 9:18 pm

Re: WTS: Anschutz 1712 barrel

Post by thauglor »

This barrel has the sporter extractor slots, at 3pm and 9pm positions. Putting it on a single shot anschutz action will need new extractor slots cut.
User avatar
Merlin
AAA Poster
AAA Poster
Posts: 771
Joined: Wed Oct 22, 2008 6:56 pm
Location: Friendswood, TX

Re: WTS: Anschutz 1712 barrel

Post by Merlin »

I put one on one of my CZ 457 and it is the best shooting CZ I own including two Lilja barrels and a Lothar Walther and two stock barrels. Recut the slots and glued it in the action.
"Only God can judge me." Merlin

"Merlin..Your'e a rimfire whore." God

NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
Post Reply