Leupold scope broken?

All the dope on risers, rings, scopes and optics.
Post Reply
paulnevers
Unclassified Poster
Posts: 3
Joined: Wed Mar 31, 2021 3:40 pm

Leupold scope broken?

Post by paulnevers »

Hi all, I ran into a problem with a Leupold VX3 6.5-20x EFR. Originally the scope was on a benchrest type .243 rifle I acquired, shot it out to 600 yards worked great. Ended up switching the scope on that rifle so figured I would put the Leupold on my smallbore silhouette rifle. While sighting it in I couldn't get the elevation high enough for rams. Turkeys sighted in at 8.75moa (4 revolutions) at around 12.5 it is 2 inches low for rams. After 12.5 and up with 7moa more of turret travel the impact never changes, still 2 inches low.

Guessing there is an issue since I am not getting an impact change with the last 7-8moa of adjustment. Bad spring?

Thought I would ask if anyone has experienced this or knew any tricks to free the movement up so I can at least test the scope out at a match or two. Hold high I guess :lol: then send it in for repair...

-Paul
xpilot
AA Poster
AA Poster
Posts: 391
Joined: Wed Nov 29, 2006 3:42 pm
Location: Mesa, Arizona

Re: Leupold scope broken?

Post by xpilot »

Shim up the rear ring. easy peasy. Scope is probably fine.
thauglor
AAA Poster
AAA Poster
Posts: 536
Joined: Thu Aug 08, 2013 9:18 pm

Re: Leupold scope broken?

Post by thauglor »

Is your scope centered left/ right? The more to the extremes you are on either direction, the less adjustment range you have in the perpendicular direction. Otherwise get a warranty work order
atomicbrh
Master Poster
Master Poster
Posts: 1272
Joined: Sat Apr 15, 2006 7:24 pm
Location: Rural Mississippi

Re: Leupold scope broken?

Post by atomicbrh »

Shim bottom of rear ring.
Cut a small section of plastic milk jug or soda can.
It is a common thing.
paulnevers
Unclassified Poster
Posts: 3
Joined: Wed Mar 31, 2021 3:40 pm

Re: Leupold scope broken?

Post by paulnevers »

The part that had me weirded out was that my Weaver with the same rings is able to get on rams. I checked and it too is at the top of its elevation adjustment but it makes it with some to spare so I expected the Leupold to work without issues. Either way shimming seems like a quick and easy way to get on target. Thanks for the suggestions!

thauglor wrote: Sat Jun 25, 2022 4:05 am Is your scope centered left/ right? The more to the extremes you are on either direction, the less adjustment range you have in the perpendicular direction. Otherwise get a warranty work order
Good thinking, checked and windage is closely centered.
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1809
Joined: Mon Jul 27, 2009 9:33 pm

Re: Leupold scope broken?

Post by DavidABQ »

I have the same problem with my Anschutz 1712. I am using a DIP 20 MOA scope rail to be able to reach out to Rams. BTW: I am using SK STD. Plus if you are interested.
paulnevers
Unclassified Poster
Posts: 3
Joined: Wed Mar 31, 2021 3:40 pm

Re: Leupold scope broken?

Post by paulnevers »

DavidABQ wrote: Mon Jun 27, 2022 8:21 pm I have the same problem with my Anschutz 1712. I am using a DIP 20 MOA scope rail to be able to reach out to Rams. BTW: I am using SK STD. Plus if you are interested.
Good to hear its not just me, guess I am just one of the lucky ones. I vaguely remember reading somewhere about shimming the scope but as a "good idea" to keep the adjustments centered not because it was needed to get on target or at least that's what it took from it. Will get it shimmed and see what shooting with a dot larger then 1/8 on animals is like. Thanks.

If I ever get around to it I might test a tall target to see what amount of elevation adjustment I really do get for fun. Be interesting to see exactly what I am working with.
User avatar
Merlin
AAA Poster
AAA Poster
Posts: 699
Joined: Wed Oct 22, 2008 6:56 pm
Location: Friendswood, TX

Re: Leupold scope broken?

Post by Merlin »

IMO definitely Something wrong with the scope. I've had several on various rifles and 100 yards is no problem with adjustment room to spare.
"Only God can judge me." Merlin

"Merlin..Your'e a rimfire whore." God

NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1809
Joined: Mon Jul 27, 2009 9:33 pm

Re: Leupold scope broken?

Post by DavidABQ »

Merlin wrote: Sat Jul 02, 2022 6:29 am IMO definitely Something wrong with the scope. I've had several on various rifles and 100 yards is no problem with adjustment room to spare.
Your statement is true providing that the scope attachment point, top of the receiver with the dovetails and the centerline of the bore. If they are not parallel with each other, as I suspect in my case, then you can easily run out of elevation.

BTW: I have had a few different Leupold scopes on my rifle because, like you , I thought that I had a scope issue.
Last edited by DavidABQ on Mon Jul 04, 2022 3:05 pm, edited 1 time in total.
atomicbrh
Master Poster
Master Poster
Posts: 1272
Joined: Sat Apr 15, 2006 7:24 pm
Location: Rural Mississippi

Re: Leupold scope broken?

Post by atomicbrh »

The shimming is not just some kind of hack.
Years ago factory printed scope instructions included information on when to shim and how to shim.
Post Reply