Source for Extra-Tall Scope Rings?

[Jetmugg]

I'm having a SB rifle re-stocked by one of the well-known gunsmiths who do that kind of work. I should receive the rifle back soon, and expect that I'll be looking for a new set of scope rings to fit a 1" diameter scope.

I've used BKL mounts on various rifles over the past 15-ish years, and have been happy with them. BKL does not offer any rings taller than 1" from top of receiver to bottom of scope tube.

Where are you folks sourcing rings up to the legal height of 1.5"? I may not need (or want) to go that high, but I'd like to be prepared.

Any recommendations would be appreciated.

Steve.

[shooterer]

I have used these spacers along with my BKL rings on a couple of smallbore rifles with no movement during the season.

https://www.bkltech.com/BKL-1-Long-Dove ... kl-167.htm

I don't remember if I have the 1" or 5/8" long ones.

[Jetmugg]

Thanks - I actually have a set of those riser blocks as well. My hope is to use them to figure out the best overall height for the new stock, and then would like to purchase a set of rings to work at that height.

Like you, I don't think there's anything wrong with the BKL riser blocks, but would prefer not to have any extra pieces in the whole assembly. A pair of one-piece rings is my goal.

[acorneau]

I wrote a whole article on the subject for the NASSA technical blogs...

https://nassasilhouette.org/dovetail-scope-rings/

[thauglor]

Hi Steve,

I have an extra set of Morr accuracy 1.45" tall silhouette rings, that is from top of the dovetail to the bottom of the scope. They also weigh 1.6 oz for the pair, pm if you are interested in them. They fit the 11mm rail

-Zoran

[Jetmugg]

I wrote a whole article on the subject for the NASSA technical blogs...

https://nassasilhouette.org/dovetail-scope-rings/

That is excellent work!!!

Thank you,

Steve.

[Jetmugg]

Hi Steve,

I have an extra set of Morr accuracy 1.45" tall silhouette rings, that is from top of the dovetail to the bottom of the scope. They also weigh 1.6 oz for the pair, pm if you are interested in them. They fit the 11mm rail

-Zoran

Zoran:

That is very good to know. I should have the rifle back in my hands very soon, and I hope to work out the preferred scope height ASAP (as soon as next weekend - June 10-11).

[Jetmugg]

Hi Steve,

I have an extra set of Morr accuracy 1.45" tall silhouette rings, that is from top of the dovetail to the bottom of the scope. They also weigh 1.6 oz for the pair, pm if you are interested in them. They fit the 11mm rail

-Zoran

Zoran:

That is very good to know. I should have the rifle back in my hands very soon, and I hope to work out the preferred scope height ASAP (as soon as next weekend - June 10-11).

[cedestech]

Peter Deals rings are amazing… just saying.

[AMB]

What Emmett said, for a 1712 especially, Pete's are amazing. He's also a SB silhouette shooter.

[CoolArrowMarksman]

Can Morr or D3 rings be used in a High Power rifle?

[jbmarshtx]

Can Morr or D3 rings be used in a High Power rifle?

You will probably need a dovetail type adapter. I bought the harrels and the harrels rings for my remington 700.

Morr: https://www.morraccuracy.com/store/c1/F ... p559129718

Harrels: https://www.harrellsprecision.com/produ ... s-aluminum

[acorneau]

Pete is working on dovetail bases for the R700 and similar so you can use his dovetail rings. He says he's been using a set on his own HP rifle and they've been working just fine.

He sent me a prototype set to try out but the screw sizes were a little off. My receiver has been changed to #8 screws where the factory size are #6. Once I can get the screw holes opened up I'll get them on my HP gun.