What are good loads for 7-08 cal need some where to start

More expensive to feed, but worth it.
Post Reply
daisy
A Poster
A Poster
Posts: 238
Joined: Wed Feb 07, 2007 8:05 pm
Location: Pambula Australia

What are good loads for 7-08 cal need some where to start

Post by daisy »

Seeing how I'm getting a 7-08 soon I would like to know a few prover loads to try .

TIA
daisy
Joaquin B
AA Poster
AA Poster
Posts: 270
Joined: Sat Aug 12, 2006 11:26 am
Location: Oro Valley, Arizona

Post by Joaquin B »

Daisy,

For the 7mm-08, I've been using ~36.0 grains ( give or take a few tenths) of Varget (I think it's your ADI 2208 powder) with 140 grain bullets for C,P,T. For Rams, 41.8 grains of Varget propelling Sierra 168 gr, HPBT Match King bullets works great.

I hope this info helps,
Joaquin B
Bob Mc Alice
Expert Master Poster
Expert Master Poster
Posts: 1772
Joined: Mon Sep 11, 2006 6:54 am
Location: Colorado

Post by Bob Mc Alice »

Both my 7-08's use Varget also. Sierra 130MK 36.0 grs........Sierra 168MK 39.5grs... Here is a link to the Hodgdon Powder Loading Data....follow the directions and select 7-08 for load data...very extensive load info. http://data.hodgdon.com/cartridge_load.asp
daisy
A Poster
A Poster
Posts: 238
Joined: Wed Feb 07, 2007 8:05 pm
Location: Pambula Australia

Post by daisy »

Thanks Joaquin & Bob,

Those loads for the 134 & 140 pills are about 4 grains lower then the start loads so I probably would never have tried them. I'll give them a go when get my gun.

Thanks again
Daisy
fwt1712
B Poster
B Poster
Posts: 68
Joined: Sat Apr 15, 2006 3:11 pm
Location: Tasmania

Also try AR2209

Post by fwt1712 »

Daisy,

you can also try 2209 if the 2208 ones don't suit your rifle, although I can vouch for the 2208 loads mentioned.

I think Con and Heinous Dave True use about 42-44gn of '09, but you should check with them. Juddy has also had good results with similar loads.

regards,
Nigel.
Post Reply