22LR Powder Charge
-
- B Poster
- Posts: 26
- Joined: Thu Mar 27, 2008 4:28 pm
- Location: Arizona
22LR Powder Charge
Hi: Can anyone tell me what the powder charge in grains might be for a 1250 velocity & 1080 velocity 22lr with a 40 grn rnl cartridge? I'm curious as to what, if any, the recoil difference in ft. lbs. would be? I shot a .296 group at 50 yds the other day with the high velocity round and didn't do near as well with the CCI std. velocity. Will I see my impact on the chickens with high velocity?
-
- A Poster
- Posts: 234
- Joined: Fri Nov 18, 2005 2:41 pm
- Location: olympia, washington
- Contact:
-
- B Poster
- Posts: 26
- Joined: Thu Mar 27, 2008 4:28 pm
- Location: Arizona
Dave: I also shot at 100yds. on paper, and that group was .625 ctc for 5 rounds. My T/C carbine just seems to like Fed.510 better than most others. Years ago when I shot a little small bore I had real good results with Fed Gold Medal Target. I never did as well with CCI "Green Tag" back then either. Sometimes I think my chamber accepts Fed. & Win. a little better because the ogive on the bullet is a tad wider? Just bought some Wolf MT & SK Match the other day but have not tried it yet. The lube on both look better to me than the FED, so maybe I'll find a good std.velocity for silhoutte.
- BlauBear
- Uber Master Poster
- Posts: 2734
- Joined: Fri Jul 07, 2006 10:43 am
- Location: Fort Smith, AR
There is a noticeable change in recoil between standard and high velocity ammunition, although I don't have numbers.
There are at leas three issues with high velocity ammunition:
There are at leas three issues with high velocity ammunition:
- They're louder and other shooters sometimes complain.
- Some match directors worry the more energetic ammunition will damage chickens, so only allow standard velocity ammunition.
- Conventional wisdom is that sonic ammunition falls below the speed of sound somewhere around the turkey line and gets slapped around by the transonic buffeting. I have noticed that Federal 719 will convince me it's all a myth by solidly smacking several rams in a row, and then do something really weird... That couldn't possibly be me of course...
"If the America people ever allow private banks to control the issuance of their currencies, first by inflation and then by deflation, the banks and corporations that will grow up around them will deprive the people of all their prosperity" - TJ
-
- A Poster
- Posts: 223
- Joined: Sun Jan 28, 2007 3:18 pm
- Location: Vancouver Island, BC, Canada
High velocity stuff is moved around more by the wind than standard velocity stuff, too, so there's another thing to think about.
As for the difference in recoil, well, for every action there's an equal and opposite reaction. Whatever the difference is in muzzle energy between two rounds will be the same difference in recoil energy.
As for the difference in recoil, well, for every action there's an equal and opposite reaction. Whatever the difference is in muzzle energy between two rounds will be the same difference in recoil energy.
-
- A Poster
- Posts: 239
- Joined: Wed Apr 26, 2006 6:25 am
- Location: Central Arkansas
Disassembly
Just take a pair of plyers (why are plyers called plyers when ther are in fact only one and should be plyer?)and the bullet will twist out.
Simple to do and safe if you hold the cartridge in your hand.
Simple to do and safe if you hold the cartridge in your hand.
George
No one cares how much you know until they know how much you care.
No one cares how much you know until they know how much you care.
-
- A Poster
- Posts: 223
- Joined: Sun Jan 28, 2007 3:18 pm
- Location: Vancouver Island, BC, Canada
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
I have pulled the bullets to switch out the powder for lots of my 22mag ammo. All you need to do it is a 25acp shell holder and the Hornady collet bullet puller with the 22 cal collet. I haven't pulled any 22lr bullets, but I doubt it would be any different to do. You just want to know the difference between powder weights between a high velocity and a standard velocity 22lr round? Isn't assuming that it's the same powder a pretty big assumption?
-
- A Poster
- Posts: 223
- Joined: Sun Jan 28, 2007 3:18 pm
- Location: Vancouver Island, BC, Canada
As for CCI Standard, well, this is probably why you didn't like your results:
The quality control seems to be a little lacking. I'd suggest trying to find some Eley Target Rifle or Lapua Super Club. Or perhaps some Federal Gold Medal 711b might be easier to locate. They'll probably all do much better than the CCI Standard.
Code: Select all
CCI Standard H07N21
grains count
49.5 2
49.6 6
49.7 6
49.8 4
49.9 4
50.0 14
50.1 13
50.2 19
50.3 17
50.4 31
50.5 43
50.6 72
50.7 97
50.8 38
50.9 18
51.0 29
51.1 28
51.2 43
51.3 13
51.4 2
51.5 1
Total rounds
500
Average
50.656
Extreme spread
2.00
-
- A Poster
- Posts: 234
- Joined: Fri Nov 18, 2005 2:41 pm
- Location: olympia, washington
- Contact:
-
- B Poster
- Posts: 26
- Joined: Thu Mar 27, 2008 4:28 pm
- Location: Arizona
Well... I took apart both Fed510 & CCI std with pliers as suggested with no problem. Both appear to have the same primer compound in color but the Fed covers the whole base and the CCI has a very visable circle in the base as if you were looking at a flash hole. Perhaps that makes it ignite more evenly? The Fed powder weighed 1.3 gr and is dark black and very consistent in flake size. The CCI weighed 1.0 gr and is grey in color and not so consistent in size and is much finer. When I tried to calculate the recoil the results are the same according to my source at O.1 foot lbs. with my 8.5lb T/C. I don't know how much was learned on my part but it sure is nice getting your input and knowledge. Thanx
-
- A Poster
- Posts: 223
- Joined: Sun Jan 28, 2007 3:18 pm
- Location: Vancouver Island, BC, Canada
You don't need to take apart rounds or measure powder or anything like that in order to determine the difference in recoil. Muzzle velocity tells you that. Even if stated muzzle velocity differs from practical muzzle velocity in your gun, you still can calculate the difference from the manufacturer's stated muzzle velocity and get a result that's probably good enough for the sake of discussion. All that's required is finding out the stated muzzle velocities for each, which shouldn't be hard.
-
- B Poster
- Posts: 26
- Joined: Thu Mar 27, 2008 4:28 pm
- Location: Arizona
SHORTY: Got this recoil information from www.biggameinfo.com and needed to provide them with bullet wgt./ powder charge/ firearm wgt. Have one very similar from an old Layne Simpson artical but the website does the calculation while I'm drinking my beer. This sight also provides recoil data for black powder and various subs. Please have a look and let me know what you think. Thanx
- sobrbiker883
- AA Poster
- Posts: 432
- Joined: Sat Sep 30, 2006 10:26 pm
- Location: Gilbert AZ
Holy crap people!
Mike, if you want to shoot high velocity stuff at chickens, find what works well in your gun, and ask the match director if you can use it. Be forewarned that if you shoot at different places (BASF, Rio, Tucson) you may wind up not being able to use something you've grown accustomed to and trained around.
I really don't think 200fps difference in an 8.5 or 10 pound rifle is gonna be that noticable of a difference in your view during follow through, and if your follow through is good enough that you watch your rounds impact every shot, do yourself a favor and spend the extra coin for good match ammo, because you will be shooting Master class...........
Where in AZ do you shoot matches?
Mike, if you want to shoot high velocity stuff at chickens, find what works well in your gun, and ask the match director if you can use it. Be forewarned that if you shoot at different places (BASF, Rio, Tucson) you may wind up not being able to use something you've grown accustomed to and trained around.
I really don't think 200fps difference in an 8.5 or 10 pound rifle is gonna be that noticable of a difference in your view during follow through, and if your follow through is good enough that you watch your rounds impact every shot, do yourself a favor and spend the extra coin for good match ammo, because you will be shooting Master class...........
Where in AZ do you shoot matches?
Usually shooting scores right in class, too bad its the class below my classification!
Steve E
Steve E