I need help from someone with a CZ 452 Varmit and a MIC

GeoNLR · Post by **GeoNLR** » Tue Nov 28, 2006 7:42 am

I need help from someone with a CZ 452 Varmit and a MIC...

I need some measurments for stock inleting.

Thanks,

George

BlauBear · Post by **BlauBear** » Tue Nov 28, 2006 8:49 am

George;

I have a Varmint stock that has been modified for the Timney trigger group, but it may have what you need.

- Bob

Jason · Post by **Jason** » Tue Nov 28, 2006 9:55 am

Same here.. I have that Timney that I got from you on my Varmint, too.

jneihouse · Post by **jneihouse** » Tue Nov 28, 2006 11:41 am

I can measure my daughter's, but I've pillar bedded it so it might not be what you need. Let me know if I can help.

John

BlauBear · Post by **BlauBear** » Tue Nov 28, 2006 2:12 pm

It just occurred to me that, except for barrel size, the varmint and Silhouette are the same and I have a Silhouette that hasn't been altered at all.

Jetmugg · Post by **Jetmugg** » Wed Nov 29, 2006 2:50 pm

George:
Did you get the dimensions you were looking for? If not, I can get them for you (most likely later this evening).

SteveM.

GeoNLR · Post by **GeoNLR** » Wed Dec 06, 2006 11:49 am

Sorry to be a turd....been behind lately on reading the forums and such. Someone was kind enoungh to e-mail me the measurments that I needed and I forwarded them on for inleting.

Thanks to all,

Chicken

Jason · Post by **Jason** » Wed Dec 06, 2006 12:05 pm

If someone is dropping the cost of a Pharr stock into their CZ, they'll probably either want the adjustable sear or the Timney trigger (once Timney gets the bugs worked out). With that in mind, you might want to consider having the inletting opened up enough to accomodate those since it wouldn't really weaken the stock to take out a little more of that foam.

I need help from someone with a CZ 452 Varmit and a MIC

I need help from someone with a CZ 452 Varmit and a MIC

Did you get the dimensions you need?

...