.32-20 speeds?

Centerfires, rimfires, pistol cartridges and everything in between.
Post Reply
User avatar
mordecai
Forum Fiddler
Forum Fiddler
Posts: 965
Joined: Wed Nov 16, 2005 8:48 am
Location: WA

.32-20 speeds?

Post by mordecai »

What sort of speeds are we looking for at Pistol Cartridge animals with 100-to-115gr bullets?

Some of my recipes have 800fps up to 1250fps - that's kinda of a wide range....
I'm trying to keep from "damaging targets" while keeping as flat a trajectory as can be expected.

Thanks a bunch...
ImageImage
lone ringer
Master Poster
Master Poster
Posts: 1085
Joined: Tue May 30, 2006 9:33 am
Location: CA

Re: .32-20 speeds?

Post by lone ringer »

Don't worry Mike, you will not damage targets with a 32-20. The 218B was outlawed because some people were loading it to fast and it was capable of damaging targets but really if the targets are for PC and not SB you should be fine at any of the speeds you mention, the 25-20 goes faster and I have not heard of anybody getting in trouble by damaging targets like some max 357 and 44 mag loads have in the past.
44 mag
AAA Poster
AAA Poster
Posts: 535
Joined: Mon Oct 13, 2008 6:28 am
Location: Bradford, PA
Contact:

Re: .32-20 speeds?

Post by 44 mag »

Mine and my wifes are doing about 1100 fps no target damage and shoots very flat.
User avatar
timfinle
A Poster
A Poster
Posts: 166
Joined: Fri Dec 08, 2006 1:15 am
Location: Arizona

Re: .32-20 speeds?

Post by timfinle »

I run mine about 1500 ft/sec using a 100 grn hornaday xtp bullet. No target damage. I move the williams about 16 clicks to the rams from the chickens.
tim
Post Reply