Speed to knock down a ram 140gr .260
-
- Unclassified Poster
- Posts: 8
- Joined: Mon Oct 19, 2015 10:33 am
Speed to knock down a ram 140gr .260
I have recently been bit by the silhouette bug. Me and my uncle have been shooting rimfire this year and just starting in high power. I bought a tikka t3 in .260 and bedded it and lightened the trigger with kelbly rings and bases and a leupold EFR 6.5x20. With handloads (37gr of varget and a hornady ELD match 140. Lapua brass and cci br primer) its well under 1/2" closer to 1/4". The bullets moving at 2575fps with this setup. Is that going to be enough for rams???? As soon as it warms up matches start and I'm ready and excited. This is a sport That really can't buy a trophy and makes you a better rifleman. That's what makes this interesting to me. Thanks for helping a newbie
-
- B Poster
- Posts: 85
- Joined: Sat Sep 13, 2014 6:11 am
- Location: California - San Francisco Bay Area
Re: Speed to knock down a ram 140gr .260
There is a lot of discussion on the subject of ringing rams.
viewtopic.php?f=2&t=6972
viewtopic.php?t=9755
viewtopic.php?f=2&t=9751
It seems that having a tough enough bullet is also a significant factor. I have been using 140g Sierra Match Kings over 36 g Varget and have rung rams with good hits. The rear leg of one ram was about a quarter of an inch from the tipping point. It was suggested a tougher bullet would have knocked over that ram. Perhaps it would have. I'll have to try some hunting bullets next.
viewtopic.php?f=2&t=6972
viewtopic.php?t=9755
viewtopic.php?f=2&t=9751
It seems that having a tough enough bullet is also a significant factor. I have been using 140g Sierra Match Kings over 36 g Varget and have rung rams with good hits. The rear leg of one ram was about a quarter of an inch from the tipping point. It was suggested a tougher bullet would have knocked over that ram. Perhaps it would have. I'll have to try some hunting bullets next.
-
- A Poster
- Posts: 199
- Joined: Sun Mar 18, 2007 3:41 pm
- Location: Vancouver, WA
Re: Speed to knock down a ram 140gr .260
140 A-Max at 2620.
-
- Unclassified Poster
- Posts: 8
- Joined: Mon Oct 19, 2015 10:33 am
Re: Speed to knock down a ram 140gr .260
Thanks for the help. The ELD hornady match is very similar to an AMAX according to hornady. I emailed them about there construction. The ELD -X is similar to a SST hunting bullet with a sleeker profile. I may have to hunt down some ELD-X bullets. They are heavy jacket hunting style bullets with a high B.C. to keep the energy up and hold together upon Impact for hunting or in my case rams. Thanks for the help. Seems my speed isn't far off. It's pretty cold out here and my velocity should be around 2600ish by the time the matches start.
-
- AA Poster
- Posts: 399
- Joined: Wed Nov 29, 2006 3:42 pm
- Location: Mesa, Arizona
Re: Speed to knock down a ram 140gr .260
Why not just use the SST? A very tough bullet.
-
- Uber Master Poster
- Posts: 2746
- Joined: Wed Apr 12, 2006 2:34 pm
- Location: Casa Grande, AZ
Re: Speed to knock down a ram 140gr .260
I am using 142s at 2650. They work great. Too much speed and the bullet will disintegrate on the surface and not push them over.
- Bigfoot
- AA Poster
- Posts: 423
- Joined: Tue Apr 06, 2010 10:11 am
- Location: Seattle WA
Re: Speed to knock down a ram 140gr .260
I've had great luck with Lapua 139gr scenars. Just this weekend we were shooting in strong cross winds and I was really impressed at how they bucked the wind. I'm moving them at 2620 and other than in wet conditions haven't rang a ram with them. They have a pretty thick jacket from what I've read so this might be part of why they hold together so well.
Res ipsa loquitur
-
- Unclassified Poster
- Posts: 8
- Joined: Mon Oct 19, 2015 10:33 am
Re: Speed to knock down a ram 140gr .260
I may have to order some scenars. I've got some 142 sierra to try out. The plain SST is a good bullet but if I can get that same performance and have a good b.c. to buck the wind I will take it. I shoot alot of long range stuff and at least once a week. I've made a trailer that has 2 rotating tables that angle up and down 10 feet off the ground and outriggers for long range groundhog hunting here in VA. We shoot 55lb 1000yd benchrest rigs. I've found out that wind plays a huge part in shooting with precision. Thats why ive been stuck on the higher b.c. bullets. Thanks again for the help.