Does anyone have experience with Nikon's Scope Rings?
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Does anyone have experience with Nikon's Scope Rings?
Does anyone have any experience with the new A-Series of scope rings from Nikon?
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
I guess no one has any experience with Nikon 's new aluminum rings.
- acorneau
- AAA Poster
- Posts: 890
- Joined: Sun Feb 22, 2015 12:12 pm
- Location: Houston
Re: Does anyone have experience with Nikon's Scope Rings?
Sorry, no experience. I'm guessing most silhouette shooters tend to stay with their favorite brand.
Might get a few more responses over on RFC.
Might get a few more responses over on RFC.
Allen Corneau
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
Without randomly trying different scope rings how will they find a superior product?acorneau wrote:Sorry, no experience. I'm guessing most silhouette shooters tend to stay with their favorite brand.
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Does anyone have experience with Nikon's Scope Rings?
Without keeping their equipment consistent and practicing with it, how will they perform consistently?
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
With intensive daily practice after every component change. Of course a detail journal describing both the pros and cons of each new product tested with a spreadsheet with scores so as to give quantitative feedback.Jason wrote:Without keeping their equipment consistent and practicing with it, how will they perform consistently?
Of course the overall score should be recorded but also the individual animal count. With these values you can do what I do and graph the average match score, calculate the average and standard deviation for each animal plus the overall score. This gives me hard numbers to compare.
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Does anyone have experience with Nikon's Scope Rings?
Must be nice to have that much time. If someone were that dedicated to the sport, I'm thinking that they'd be using rings from Morr Accuracy, Marvin Pearson, or something higher end and not messing around with rings not specifically designed with silhouette in mind.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
I wish I had that sort of time too!Jason wrote:Must be nice to have that much time. If someone were that dedicated to the sport, I'm thinking that they'd be using rings from Morr Accuracy, Marvin Pearson, or something higher end and not messing around with rings not specifically designed with silhouette in mind.
I would love to order up a set of Morr Accuracy rings or a set of Kelby's but Kelby's does not do rings to fit Weaver bases. I know because I asked.
I would really like to get a set of titanium rings from Murphy Precision but they are too expensive for my pocketbook.
I have never heard of Marvin Pearson; I will have to do a search.
Thanks.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
BTW: I do record and track every shot I make in competition for statistical analysis. Averages and standard deviations are what I use.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
I went out and bought a set of the Nikon A-Series scope rings and so far so good. The packaging the rings came in said, "Made in America" which makes me happy.
The fit and finish seem as well made as any other rings with nice sharp edges and when mounted without a scope they is no lip between the two ring halves.
The finish is a little on the shiny side for my tastes but it seems to be holding up well but to be honest I have not had them on the rifle for long.
They are Weaver base rings and as such fit my +25Moa rail perfectly. They are not as nice as my Warne rings, I wish I could use them but they put me too close to the weight limit for my tastes.
The rings themselves are well made but the hardware is cheesy and cheap looking compared to either my BKL or Warne steel rings.
Not a poor choice for rings costing less than $20.
The fit and finish seem as well made as any other rings with nice sharp edges and when mounted without a scope they is no lip between the two ring halves.
The finish is a little on the shiny side for my tastes but it seems to be holding up well but to be honest I have not had them on the rifle for long.
They are Weaver base rings and as such fit my +25Moa rail perfectly. They are not as nice as my Warne rings, I wish I could use them but they put me too close to the weight limit for my tastes.
The rings themselves are well made but the hardware is cheesy and cheap looking compared to either my BKL or Warne steel rings.
Not a poor choice for rings costing less than $20.
- SteveD
- AA Poster
- Posts: 350
- Joined: Thu Sep 03, 2015 9:33 pm
- Location: Dayton, OH
- Contact:
Re: Does anyone have experience with Nikon's Scope Rings?
Thanks for the info. Please update this as you have a chance to use them more.DavidABQ wrote:I went out and bought a set of the Nikon A-Series scope rings and so far so good. .....
Are you using them on a Smallbore or HP?
I got a set of the A-Series high rings yesterday. I don't have access to my 1" scope ring alignment bar so I can't comment on their dimensional accuracy. The long screw is not particularly smooth, could be either the threaded hole or the bolt.
Otherwise they seem ok.
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Does anyone have experience with Nikon's Scope Rings?
The Nikon A-series of rings are certainly an economy set of rings, Talleys they are not but the disappointing part is that BKL makes a better product for a similar price point.
The Nikons are nice for their price but the threads are not as smooth more expensive rings.
I may have to invest in a synthetic stock because with my wood stock on my 1712 I am pushing the weight limit.
A new and heavier scope could push me over the limit.
Maybe, this scares me to say this , Jerry is correct about the weight advantage a synthetic stock affords a shooter.
The Nikons are nice for their price but the threads are not as smooth more expensive rings.
I may have to invest in a synthetic stock because with my wood stock on my 1712 I am pushing the weight limit.
A new and heavier scope could push me over the limit.
Maybe, this scares me to say this , Jerry is correct about the weight advantage a synthetic stock affords a shooter.
- SteveD
- AA Poster
- Posts: 350
- Joined: Thu Sep 03, 2015 9:33 pm
- Location: Dayton, OH
- Contact:
Re: Does anyone have experience with Nikon's Scope Rings?
For Smallbore a wood stock can be skeletonized. Something like this:
[img] [/img]
For High Power it would probably be a risk that I would not recommend taking.
I am going to have a wood Anschutz stock skeletonized as pictured for Smallbore but for High Power I am looking at a McMillan Anschutz Silhouette. It weighs 2 lbs, 4 oz with a Decelerator pad.
I weighed the A-Series high rings at 1 oz each.
[img] [/img]
For High Power it would probably be a risk that I would not recommend taking.
I am going to have a wood Anschutz stock skeletonized as pictured for Smallbore but for High Power I am looking at a McMillan Anschutz Silhouette. It weighs 2 lbs, 4 oz with a Decelerator pad.
I weighed the A-Series high rings at 1 oz each.
You do not have the required permissions to view the files attached to this post.