A non- silhouette reloading question.

More expensive to feed, but worth it.
Post Reply
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

A non- silhouette reloading question.

Post by DavidABQ »

I have a 1908 Swedish Mauser that I wish to reload for and I need some guidance. I am not looking to load for absolute accuracy, just good enough accuracy and by that I mean I can hit 18”x18” steel plate out to 200 yards. I am more concerned about not damaging the rifle.
I intend to use Hornady ELD bullets but I have no idea on weight or powder? What is a good go-to powder for 6.5X55 Swede and what is a good bullet weight for the military twist that the rifle came with?

Thank you.
Varn
A Poster
A Poster
Posts: 197
Joined: Sat Aug 12, 2006 9:46 pm

Re: A non- silhouette reloading question.

Post by Varn »

Load a 140 over 34 grains of Varget or 40 grains of H4350. Seat it so that the only the boat tail is below the neck shoulder junction. All factory 6.5x55 chambers have a long throat. Don't worry about bullet jump. it wont matter much. one of the above powders will give you nice accuracy and be very mild.
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: A non- silhouette reloading question.

Post by DavidABQ »

Varn wrote: Sun Jun 30, 2019 7:06 pm Load a 140 over 34 grains of Varget or 40 grains of H4350. Seat it so that the only the boat tail is below the neck shoulder junction. All factory 6.5x55 chambers have a long throat. Don't worry about bullet jump. it wont matter much. one of the above powders will give you nice accuracy and be very mild.
Thank you for giving me a starting point.
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: A non- silhouette reloading question.

Post by Another Dang 9 »

David I loaded ammo for a 6.5x55 a friend had and it would shoot better with flat base Spitzer type bullets better. No idea why.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
ywltzucanrknrl
A Poster
A Poster
Posts: 203
Joined: Thu Aug 06, 2009 3:41 pm

Re: A non- silhouette reloading question.

Post by ywltzucanrknrl »

David, I'm with another dang nine----my Swede 6.5's model 96's and 38's shoot best with something like the Hornady 160 round nose or a Sierra GK 140 flatbase. If you can find a box of the Sierra 160 semi pointed---they always shot great for me---but I think they may have been discontinued. I've always had good luck with mine with slower powders like 4350 and 4831. The round nose and semi pointed bullets don't give have a great trajectory, but they sure shoot good in the Swedes. With the Swede's, I stick with loads that are in the starting range listed in manuals---I shoot them a lot and like you, I don't want to damage them.
thauglor
AAA Poster
AAA Poster
Posts: 628
Joined: Thu Aug 08, 2013 9:18 pm

Re: A non- silhouette reloading question.

Post by thauglor »

The mecca of swedish mauser knowledge https://forums.gunboards.com/forumdispl ... arms-Forum
There are periodic threads on loads quite often, lots pr info.
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: A non- silhouette reloading question.

Post by Another Dang 9 »

I was loading Speer 160gr. RN with Reloader 19 powder. I think I used Speer load data or Sierras.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: A non- silhouette reloading question.

Post by DavidABQ »

Thank you VERY much everyone for the information! I feel nervous about reloading for my Swede. 8)
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: A non- silhouette reloading question.

Post by Another Dang 9 »

Post a pic. Some of the old Swedes were made into target rifles.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: A non- silhouette reloading question.

Post by DavidABQ »

I will have to go take one but mine is as-issued Carl Gustav armory regular infantry rifle.
ywltzucanrknrl
A Poster
A Poster
Posts: 203
Joined: Thu Aug 06, 2009 3:41 pm

Re: A non- silhouette reloading question.

Post by ywltzucanrknrl »

No need to be nervous David. Mine are all as issued also. I picked the first one up in 1977 and I have shot it a bunch, for sure well over 2,000 rounds that were my reloads--never an issue. They shoot fine with mild or moderate loads, they are safe, well built rifles. There should be a date stamp on the barrel near the receiver----I have a couple that were built in the early 1900's and both had new barrels in the 1930's---if you check the date stamp you can see when the barrel was put on. The only thing I can think of is to make sure it's mechanically sound, nothing obstructing the bore and check it with a set of go-no go gauges. Make sure the trigger works correctly---the as issued triggers are not bad in my opinion. There are quite a few people that shoot these in military sniper matches and I've shot the match version CG-63's in across the course matches---like I say, no need to be nervous---have someone who knows Mauser's check it out if you are not comfortable. And try the Hornady 160's, they have shot well in every as issued Swede I've owned.
ywltzucanrknrl
A Poster
A Poster
Posts: 203
Joined: Thu Aug 06, 2009 3:41 pm

Re: A non- silhouette reloading question.

Post by ywltzucanrknrl »

David, I'm a shooter and not a collector. So, I stopped at a friends house this afternoon who knows more about collecting and we talked about Swedes. He said I was wrong about the number stamp on the barrel being the year it was re-barreled or even if it was re-barreled. So, strike that comment.......
Post Reply