Bought this from ANA to rebarrel one of my rifles but going with a custom barrel instead. Comes with the collar/recoil lug. I believe ANA took these off the 54:18 actions they imported when they built a few of those 54:18 benchrest rifles. Just factory test fired.

$200 shipped

Length please. Do you know what the shank diameter is?
Thanks

I will measure it in a bit, but the specs say its a 21.5 inch barrel with an 0.7 inch muzzle diameter. Its the standard 1712 barrel. The shank is the standard anschutz barrel tenon, i will measure it for you in a an hour or so.

Barrel is 22 inches long. 0.789 inch diameter tenon.

Thanks! I am checking another rifle to see if I can fit this...

This barrel has the sporter extractor slots, at 3pm and 9pm positions. Putting it on a single shot anschutz action will need new extractor slots cut.

I put one on one of my CZ 457 and it is the best shooting CZ I own including two Lilja barrels and a Lothar Walther and two stock barrels. Recut the slots and glued it in the action.