Tikka T1 silhouette stock, sold
-
- A Poster
- Posts: 187
- Joined: Tue Jul 25, 2017 7:13 am
Tikka T1 silhouette stock, sold
I am selling a Tikka silhouette stock that I have had for about 2.5 years, and I used it as a backup the 2nd half of 2021. This was a MT Hunter flat top. The MT Hunter is Mark Pharr's newish design produced by McMillan. It has a XL Decelerator pad from the factory. The comb is about 0.25-0.5 below the bore line and parallel with the bore. Evelio did the intlet and bedding. It is set up for a Tikka T1x 22lr, but would probably work with a T3x IF you did some cutting on the inlet and barrel channel. The recoil lug is made from the bedding, so it is not the removable tikka.
I had the stock painted by palladin coatings in new braunfels. I am selling with the bottom metal since the inlet was done based on that. See images for measurements. The stock weighs under 3 pounds with 3 ounces of weight, bottom metal, and action screws. This stock has a heavy Pachmayr XL 1" pad on it, so you could save some weight there. With a stock tikka barreled action, bkl rings, 25x Leupold, and 3 extra ounces of weight it weighed 7#15oz.
sold
I had the stock painted by palladin coatings in new braunfels. I am selling with the bottom metal since the inlet was done based on that. See images for measurements. The stock weighs under 3 pounds with 3 ounces of weight, bottom metal, and action screws. This stock has a heavy Pachmayr XL 1" pad on it, so you could save some weight there. With a stock tikka barreled action, bkl rings, 25x Leupold, and 3 extra ounces of weight it weighed 7#15oz.
sold
Last edited by jbmarshtx on Tue Mar 05, 2024 6:43 pm, edited 13 times in total.
-
- A Poster
- Posts: 187
- Joined: Tue Jul 25, 2017 7:13 am
Re: Tikka T1 silhouette stock, 2-stage trigger
Additional images.
Stock bore line to comb.
Stock weight with bottom metal and screws and 3 ounces of added weight.
Stock bore line to comb.
Stock weight with bottom metal and screws and 3 ounces of added weight.
Last edited by jbmarshtx on Tue Mar 05, 2024 6:41 pm, edited 2 times in total.
-
- A Poster
- Posts: 187
- Joined: Tue Jul 25, 2017 7:13 am
Re: Tikka T1 silhouette stock, 2-stage trigger
Price on stock, bottom metal dropped to $550 shipped to you. I haven't posted to rimfire central yet, but will over the weekend.
-
- A Poster
- Posts: 187
- Joined: Tue Jul 25, 2017 7:13 am
Re: Tikka T1 silhouette stock, 2-stage trigger
Trigger is sold pending funds.
-
- A Poster
- Posts: 187
- Joined: Tue Jul 25, 2017 7:13 am
Re: Tikka T1 silhouette stock, sold
bump with lower price. Nice set up for anyone with a tikka t1x.
Last edited by jbmarshtx on Tue Mar 05, 2024 6:42 pm, edited 1 time in total.
-
- A Poster
- Posts: 187
- Joined: Tue Jul 25, 2017 7:13 am