New Remington 700 recall
Posted: Thu May 08, 2014 12:31 pm
The full article from our local paper is here: http://missoulian.com/news/local/reming ... 963f4.html
But here are the highlights.
In April, the Remington Arms Co. issued a nationwide recall of its Model 700 and Model Seven rifles equipped with the X-Mark Pro trigger saying that some may have “excess bonding agent” that could cause the rifles to accidentally fire. The recall applies to all of the rifles that were manufactured between May 1, 2006, and April 9, 2014. Rifles manufactured after April 9 have already been repaired.
“Remington has determined that some Model 700 and Model Seven rifles with XMP triggers could, under certain circumstances, unintentionally discharge,” reads a recall notification on the company’s website.
The statement goes on to say, “While Remington has the utmost confidence in the design of the XMP trigger, it is undertaking this recall in the interest of consumer safety to remove any potential excess bonding agent applied in the assembly process.”
To send in your rifle
To participate in the recall, Remington Arms Co. recommends the following:
Step 1: Visit xmprecall.remington.com or call 1-800-243-9700 (Prompt #3 then Prompt #1) Monday through Friday, 9 a.m. to 5 p.m. EDT. You will be asked to provide your name, address, telephone number, and rifle(s) serial number.
Step 2: Upon receipt of the information requested in Step 1, Remington will send you pre-paid shipping tags, boxes and written instructions. Remington will cover all related shipping, inspection and cleaning charges. Please ONLY return your rifle with the designated shipping tags and boxes, as they are marked to expedite the rifle to a dedicated Remington facility.
Upon return of your rifle, you will note a punch mark on the bolt release. This mark confirms your rifle has been inspected and specialty cleaned under this recall program.
But here are the highlights.
In April, the Remington Arms Co. issued a nationwide recall of its Model 700 and Model Seven rifles equipped with the X-Mark Pro trigger saying that some may have “excess bonding agent” that could cause the rifles to accidentally fire. The recall applies to all of the rifles that were manufactured between May 1, 2006, and April 9, 2014. Rifles manufactured after April 9 have already been repaired.
“Remington has determined that some Model 700 and Model Seven rifles with XMP triggers could, under certain circumstances, unintentionally discharge,” reads a recall notification on the company’s website.
The statement goes on to say, “While Remington has the utmost confidence in the design of the XMP trigger, it is undertaking this recall in the interest of consumer safety to remove any potential excess bonding agent applied in the assembly process.”
To send in your rifle
To participate in the recall, Remington Arms Co. recommends the following:
Step 1: Visit xmprecall.remington.com or call 1-800-243-9700 (Prompt #3 then Prompt #1) Monday through Friday, 9 a.m. to 5 p.m. EDT. You will be asked to provide your name, address, telephone number, and rifle(s) serial number.
Step 2: Upon receipt of the information requested in Step 1, Remington will send you pre-paid shipping tags, boxes and written instructions. Remington will cover all related shipping, inspection and cleaning charges. Please ONLY return your rifle with the designated shipping tags and boxes, as they are marked to expedite the rifle to a dedicated Remington facility.
Upon return of your rifle, you will note a punch mark on the bolt release. This mark confirms your rifle has been inspected and specialty cleaned under this recall program.