jacketed bullets for silouette?

Centerfires, rimfires, pistol cartridges and everything in between.
Post Reply
hunta270
Unclassified Poster
Posts: 7
Joined: Fri Feb 25, 2011 1:04 am

jacketed bullets for silouette?

Post by hunta270 »

G'day

i'm just gettin started in cowboy metallic silouette and i'm under the impression that i'm not allowed to jacketed bullets for this shoot?.. i know the rules say that loads must not damage targets but i often see people on this forum and others suggesting loads with jacketed projectiles for silouette. should i just play it safe and stick to cast or are my regular hunting loads likely to be fine and not punch through the targets i dont want to find out the hard way and have to pay for repairs on damaged targets
krgriggs
B Poster
B Poster
Posts: 81
Joined: Sun Mar 15, 2009 2:02 pm

Re: jacketed bullets for silouette?

Post by krgriggs »

I use lead bullets on both pistol caliber and rifle caliber. Although looking at the 2010 nra nationals in pistol caliber 82 competitors used jacketed bullets and 51 used lead bullets. In rifle caliber 79 used jacketed bullets and 57 used lead bullets. I would say jacketed bullets are more likely to damage targets then lead but you can reduce loads on pigs and chickens
User avatar
Ramslammer
A Poster
A Poster
Posts: 241
Joined: Sat Apr 22, 2006 1:21 am
Location: Tasmania Australia

Re: jacketed bullets for silouette?

Post by Ramslammer »

G'Day Hunta270

Most of us here in Aus are using cast. I use them simply due to cost and availability. The shops here in Tas don't stock bullets for the rifles I use. I see on your other post you are using Hawksbury's and they are well priced and do the job.
I hope you can make the CLAS Nationals at Eagle Park(VIC). They start with practice on the 27th April and finish on the 1st May. Come along and enjoy.
Juddy
The Chairman has spoken!!
hunta270
Unclassified Poster
Posts: 7
Joined: Fri Feb 25, 2011 1:04 am

Re: jacketed bullets for silouette?

Post by hunta270 »

i'll be shooting in my first centrefire match this sat see how i go with my new rifle :( got plenty of brass to load before then tho... that blackhawkes are lubed and read to go just gotta get some Ar2205 and ill be set only problem i'm using open sights so will be interesting
Post Reply