7-08 loads

siloet56 · Post by **siloet56** » Mon Apr 25, 2011 5:59 am

Wanting to know what kind of powder everyone is using for their 175gr 7mm sierras????? Been using Varget here

thx Mike

Trent · Post by **Trent** » Mon Apr 25, 2011 8:04 am

Four posts down the page from yours.

http://www.steelchickens.com/forums/vie ... f=2&t=5508

You are already using probably the most common 7-08 powder. Varget works very very well.

Trent · Post by **Trent** » Mon Apr 25, 2011 8:07 am

Welcome to steelchickens by the way!! Looks like the welcome wagon kind of rolled right past you.

Welcome!

siloet56 · Post by **siloet56** » Mon Apr 25, 2011 9:05 am

thx very much

Snake · Post by **Snake** » Mon Apr 25, 2011 9:28 am

In an 8 twist 3 groove barrel I use 37grs of varget...with a winchester primer. It will take up to 39 with some primer flattening....One doesn't need that. ( Winchester brass)....Norma brass or lapau limits one to about 38grs...the adventurous can try 39

Bob Mc Alice · Post by **Bob Mc Alice** » Mon Apr 25, 2011 11:31 am

I shoot both 175 gr. Hornady Interlock and Sierra SPBT. Loads that my guns prefer are 38.0 Varget.....37.0 RL-15.....43.0 I4350. The 4350 load is overall the best in accuracy and provides 100 fps. more for same pressure as the others.

siloet56 · Post by **siloet56** » Tue Apr 26, 2011 5:04 am

IMR 4350...thank you. Cant wait to try it....

fwt1712 · Post by **fwt1712** » Sun May 01, 2011 4:40 am

I've found 42gn x AR2209 to be very accurate. This is one of the Australian made Mulwex powders sold by Hodgdon in the States as H4350 I believe.

7-08 loads

7-08 loads

Re: 7-08 loads

Re: 7-08 loads

Re: 7-08 loads

Re: 7-08 loads

Re: 7-08 loads

Re: 7-08 loads

Re: 7-08 loads