How tight for bolt shroud on an Anschutz 1710 hb

This is what we do.
Post Reply
p5200
Unclassified Poster
Posts: 2
Joined: Sat Aug 24, 2013 4:06 am

How tight for bolt shroud on an Anschutz 1710 hb

Post by p5200 »

I installed a J&P Striker spring kit and was wondering if the shroud should be screwed back on just til it's snug or, as tight as I can get it using my fingers? Thanks! :)
Top
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: How tight for bolt shroud on an Anschutz 1710 hb

Post by Bob259 »

p5200 wrote:I installed a J&P Striker spring kit and was wondering if the shroud should be screwed back on just til it's snug or, as tight as I can get it using my fingers? Thanks! :)
On my 54 action I just snugged it up so it was tight, I would not try to over tighten it, snug enough so it won't loosen is fine.
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
Top
p5200
Unclassified Poster
Posts: 2
Joined: Sat Aug 24, 2013 4:06 am

Re: How tight for bolt shroud on an Anschutz 1710 hb

Post by p5200 »

Maybe I'd better loosen mine a little and re tighten it with a little less torque. Thanks! :)
Top
Post Reply

Return to “Smallbore Rifle”