bolt shims?

[OnaginOffagin]

I have an older 18XX Anschutz prone gun with a Hart Barrel that was installed by Karl Kenyon that I use for gallery..... this shim (sorry for the poor photo) was on the bolt, in front of that cylinder with the bolt handle attached. I assume it was a headspace mechanism... the rifle shoots very accurately without it, but it sometimes doesn't cock without forcibly slamming the bolt forward..... my question: The shim has a crack in it (the reason I now have it off the bolt), and I was wondering if I should replace it.... do these things come in kits, somewhere, or was it likely a one-off by Karl Kenyon? The barrel can't be headspaced normally because the action has been threaded. Any information appreciated.

[Jerry G]

If it was threaded it can be head spaced, I thought.

[Bob259]

Call Neal Stepp at I.S.S 877-595-2090 he should be able to help you. If it's an Anschutz piece he will know it and may have one in stock.

[Pete]

Hey Mel, that shim looks like one from a kit made by "Surefire" to time their suppressor adaptors. I have a package of them that I will bring to Pe Ell tomorrow.
Pete

[OnaginOffagin]

Got em' Pete! Thanks to you for the help! I'll bring the unused back to the Conard......thanks again!