Need to make weight

This is what we do.
Post Reply
reelangler
B Poster
B Poster
Posts: 41
Joined: Fri Jun 15, 2012 5:55 am
Location: Churchton, MD

Need to make weight

Post by reelangler »

Headed to winnsboro. Gun weighs 8.82 on the scale not 8.5. It is a 1712 with a leupold 6.5-20 with warne rings. Susan has the same set up but with a leupold fixed 30. Took the adj caps off. Pulled the sling studs.

What's next?

Looking forward to shooting my first match and a life time of getting beat by my wife!

Thanks!
Dan
reelangler
B Poster
B Poster
Posts: 41
Joined: Fri Jun 15, 2012 5:55 am
Location: Churchton, MD

Re: Need to make weight

Post by reelangler »

Ok Susan just reminded me that the scale needs to say8.8
User avatar
Jason
Uber Master Poster
Uber Master Poster
Posts: 3002
Joined: Tue Feb 28, 2006 7:36 pm
Location: Snohomish, WA

Re: Need to make weight

Post by Jason »

If your scales reads in pounds only, it needs to say 8.50lbs or less. If your scales reads in pounds and ounces, it needs to say 8lb 8.0oz or less. If it says 8.8lbs, then you're 4.8oz over the limit.
topclass
A Poster
A Poster
Posts: 212
Joined: Sun Apr 03, 2011 9:06 am
Location: Central Texas

Re: Need to make weight

Post by topclass »

to get my 1710 to make weight I switched from a 6.5-20 to a fixed 25 -- saved almost 3 ounces!
User avatar
OnaginOffagin
AA Poster
AA Poster
Posts: 409
Joined: Sun Sep 09, 2007 9:30 am
Location: Ellensburg, Wa, USA

Re: Need to make weight

Post by OnaginOffagin »

Before I switched to a Steve Wooster stock, I had to remove the buttplate of my 1710 and drill behind it.....but before I could drill behind it, I had to borrow a carbide drill bit! Them beautiful Meister-class stocks that came with the 1710s were muy hard, muy hard! :D
"Honor, Respect, Service, Humility....." (Lt. Gen. Hal Moore 1st Bn, 7th Cavalry)
CWS
A Poster
A Poster
Posts: 127
Joined: Tue Jun 06, 2006 9:36 pm
Location: Corpus Christi, TX

Re: Need to make weight

Post by CWS »

Warne rings are heavy... switch to BKL's and bore out behind the buttplate. The 1712's were made for this game and should be within range anyway. If you don't have time to get it done, bring it anyway and we'll fix it there. Won't be the first time....
Boyd L.
AA Poster
AA Poster
Posts: 317
Joined: Sun Mar 08, 2009 5:42 pm

Re: Need to make weight

Post by Boyd L. »

CWS wrote:Warne rings are heavy... switch to BKL's ...
I've used the BKLs and even Weaver bases with Weaver extension rings and still made weight with an EFR and no other accommodations. I don't know much about Warne rings, but sounds like that could be an issue. Particularly dense walnut (while often beautiful) can be a pain to get down in weight. Drills, mills, routers and such.....tsk, tsk, tsk. :-ss :-ss But I've done it a couple of times.
reelangler
B Poster
B Poster
Posts: 41
Joined: Fri Jun 15, 2012 5:55 am
Location: Churchton, MD

Re: Need to make weight

Post by reelangler »

I have a set of BLK 257's. Going to try that tonight. I just didnt care for the extra height. Ill see how it goes. right now the scale says 8 lbs 8.2 oz so i am really close. worst case i have to do a little work at the range.

Susans gun with the fixed 30X is just fine. being a brand new shooter she told me i cant have that scope, all the movement will goof me up i guess. Some times i listen to her :D

thanks yall

Dan
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Need to make weight

Post by Bob259 »

reelangler wrote:............... Some times i listen to her :D
thanks yall Dan
Smart choice Dan... ;)

With a Leupold 6.5-20 EFR and BLK's I was under with my 1712, so you should be fine.
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
reelangler
B Poster
B Poster
Posts: 41
Joined: Fri Jun 15, 2012 5:55 am
Location: Churchton, MD

Re: Need to make weight

Post by reelangler »

Blk rings did it. 8 lbs 7.2 ozs

Hope it will hold up after the humidity gets to the stock! Really don't want to have to drill the stock.

See y'all in winnsboro

-Dan
Post Reply