Need to make weight
-
reelangler
- B Poster

- Posts: 41
- Joined: Fri Jun 15, 2012 5:55 am
- Location: Churchton, MD
Need to make weight
Headed to winnsboro. Gun weighs 8.82 on the scale not 8.5. It is a 1712 with a leupold 6.5-20 with warne rings. Susan has the same set up but with a leupold fixed 30. Took the adj caps off. Pulled the sling studs.
What's next?
Looking forward to shooting my first match and a life time of getting beat by my wife!
Thanks!
Dan
What's next?
Looking forward to shooting my first match and a life time of getting beat by my wife!
Thanks!
Dan
-
reelangler
- B Poster

- Posts: 41
- Joined: Fri Jun 15, 2012 5:55 am
- Location: Churchton, MD
Re: Need to make weight
Ok Susan just reminded me that the scale needs to say8.8
- Jason
- Uber Master Poster

- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Need to make weight
If your scales reads in pounds only, it needs to say 8.50lbs or less. If your scales reads in pounds and ounces, it needs to say 8lb 8.0oz or less. If it says 8.8lbs, then you're 4.8oz over the limit.
-
topclass
- A Poster

- Posts: 212
- Joined: Sun Apr 03, 2011 9:06 am
- Location: Central Texas
Re: Need to make weight
to get my 1710 to make weight I switched from a 6.5-20 to a fixed 25 -- saved almost 3 ounces!
- OnaginOffagin
- AA Poster

- Posts: 409
- Joined: Sun Sep 09, 2007 9:30 am
- Location: Ellensburg, Wa, USA
Re: Need to make weight
Before I switched to a Steve Wooster stock, I had to remove the buttplate of my 1710 and drill behind it.....but before I could drill behind it, I had to borrow a carbide drill bit! Them beautiful Meister-class stocks that came with the 1710s were muy hard, muy hard! 
"Honor, Respect, Service, Humility....." (Lt. Gen. Hal Moore 1st Bn, 7th Cavalry)
-
CWS
- A Poster

- Posts: 127
- Joined: Tue Jun 06, 2006 9:36 pm
- Location: Corpus Christi, TX
Re: Need to make weight
Warne rings are heavy... switch to BKL's and bore out behind the buttplate. The 1712's were made for this game and should be within range anyway. If you don't have time to get it done, bring it anyway and we'll fix it there. Won't be the first time....
-
Boyd L.
- AA Poster

- Posts: 317
- Joined: Sun Mar 08, 2009 5:42 pm
Re: Need to make weight
I've used the BKLs and even Weaver bases with Weaver extension rings and still made weight with an EFR and no other accommodations. I don't know much about Warne rings, but sounds like that could be an issue. Particularly dense walnut (while often beautiful) can be a pain to get down in weight. Drills, mills, routers and such.....tsk, tsk, tsk.CWS wrote:Warne rings are heavy... switch to BKL's ...
-
reelangler
- B Poster

- Posts: 41
- Joined: Fri Jun 15, 2012 5:55 am
- Location: Churchton, MD
Re: Need to make weight
I have a set of BLK 257's. Going to try that tonight. I just didnt care for the extra height. Ill see how it goes. right now the scale says 8 lbs 8.2 oz so i am really close. worst case i have to do a little work at the range.
Susans gun with the fixed 30X is just fine. being a brand new shooter she told me i cant have that scope, all the movement will goof me up i guess. Some times i listen to her
thanks yall
Dan
Susans gun with the fixed 30X is just fine. being a brand new shooter she told me i cant have that scope, all the movement will goof me up i guess. Some times i listen to her
thanks yall
Dan
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Need to make weight
Smart choice Dan... ;)reelangler wrote:............... Some times i listen to her
thanks yall Dan
With a Leupold 6.5-20 EFR and BLK's I was under with my 1712, so you should be fine.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
reelangler
- B Poster

- Posts: 41
- Joined: Fri Jun 15, 2012 5:55 am
- Location: Churchton, MD
Re: Need to make weight
Blk rings did it. 8 lbs 7.2 ozs
Hope it will hold up after the humidity gets to the stock! Really don't want to have to drill the stock.
See y'all in winnsboro
-Dan
Hope it will hold up after the humidity gets to the stock! Really don't want to have to drill the stock.
See y'all in winnsboro
-Dan